Question about Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

1 Answer

How do i replace the belt foe whirlwind vaccum

How do i replace the belt for whirlwind vaccum ...cant open the bottom

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Remove 4 screws on top and top plate will lift up exposing the belt and roller. Make sure you remove hair and other debris before replacing.

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the belt on my mom's Eureka Whirlwind litespeed 12 amp 15" ?


take the cover off from the bottom there should be clips or screws on the bottom.and work the old belt off and new one on

Aug 12, 2010 | Eureka Whirlwind Litespeed 5740 Bagless...

1 Answer

How do I change belt for Eureka Whirlwind Lite "Boss" model 450 A


Remove the 4 screws on the yellow top of the vacuum. The yellow plate will pop up exposing the belt and roller.

Jan 20, 2010 | Eureka Whirlwind Litespeed 5740 Bagless...

2 Answers

I Need to change the belt on hooverwhirlwind


there should be 4 screws on the bottomsome have little flat snap that secure the bottom cover on.push the snaps toward the outside of the base and the cover should come off.if they are screws just remove the screws and take off the bottom plate.then you will be at the belt and roller.be sure to clean the old rubber off the motor shaft before you put the new belt on.otherwise the new belt won't last long

Apr 10, 2009 | Vacuums

2 Answers

Belt location


If you torn the macine over, at the bottom of the sweeper you will see the belt on on side. You have to take the bottom part apart and remove the brushes to replace the belt. I hope this helps.

Jan 21, 2009 | Eureka Whirlwind 4388 Bagless Upright...

3 Answers

Changing belt - Eureka Whirlwind 5740


I tried the website for manuals but no luck. I called the toll-free # 1-800-282-2886 and got a rep right away. I gave him the model and s/n (lower bottom on the back side) and he walked me thru it. For the model I have, there are 3 screws to remove - With the vacuum upright and standing facing it - there is on on the right and one on the left of the bottom cover and one on the left side near the hose intake. Remove those to get to the belt. I ordered the belt with him too - althought the belts were cheap ($2.99 for 2) the shipping was $8. If this didnt help - call the 800# - they were great.

Dec 08, 2008 | Eureka Whirlwind Litespeed 5740 Bagless...

1 Answer

Eureka whirlwinde litespeed vacuum - model 5841


very simple under all three screws in the front (two on sides and one in back) once open--you can take off that panel...take brush out...take old belt out...put new belt on..around brush..place both inside...and make sure belt is around that little pole thing towards the back close panel, replace screws

Mar 22, 2008 | Eureka WhirlWind Litespeed 5844 Upright...

1 Answer

Changing a belt


Take off the bottom plate, look in the bottom to see if there are any screw, could be 2 of them, then from the bottom there is a slot on each side of the top cover, using a flat screwdriver, insert blade into the slot and pry up to release the locking tabs. Belt # is 38528040. Put the bell over the brush roll, put belt thru opening and put atound the motor shaft, put back together.

Jan 22, 2008 | Vacuums

2 Answers

How to change belt on Eureka Whirlwind


On the top cover, there are holes at the front on both sides, there is a screw on each side in one of the holes. Take the out, and the cover should come off, then you can get to the brush roll and belt.

Dec 27, 2007 | Eureka WhirlWind 4381 Upright Vacuum

1 Answer

Eureka whirlwind light speed


Wish you had given your model number, but most of these, there are 2 screws on the top cover, near the front, remove those and the top comes off, the belt and brush roll are exposed.

Dec 02, 2007 | Vacuums

Not finding what you are looking for?
Eureka Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

JoeVacs

Level 2 Expert

357 Answers

Alan Matzke

Level 2 Expert

78 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...