Question about Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio TE-2400 Cash Register Solution

Flexion1, thanks for getting back to me.
In relation to your instructions about the PLU button function, I think I have to ask you for the reset code because if i press the button marked PLU on it, 0.02 is displayed on the screen. Therefore when I press 1 on the keyboard then PLUbutton it gives a long beep sound and 0.12 is displayed on the screen and when i press 2 then the PLU button, 0.22 displayed along with another long beep sound.

Still my problem with the Department occupying the keyboard allocation for flat PLU's are not resolved (Dept 1 allocated to flat PLU 007 & 014, Dept 2 allocated to flat PLU 006 & 013.........upto Dept 10 allocated to flat PLU 62 & 69).

In relation to the NS button, the button works now after i followed your instruction so many thanks for that! =)

As for your solution on the VAT breakdown, I couldnt find the "Transaction Key Program" in my manual so i was wondering if you can give me any more additional information on that please and on which page number of the user's manual.
Hope to hear from you soon! Many Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Ok. it looks like you have a dept or item assigned in place of your PLU button. You just need to replace it with the original and then you can try linking the depts again.
Turn key to program mode 4 SUBTOTAL 48 Now press the PLU button SUBTOTAL
Now try the programming for department link again and see if it works this time.
It sounds like you don't have the programming manual. you should have two manuals if you are programming the machine yourself. There is no programming in the user manual except for quick setups so it is for operating only. You should have this manual as well for the programming: http://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html
If you look at the preview, you will see that this manual has all the system programming in it. I assumed you had it when you were mentioning the VAT breakdown programming. It is pretty much essential for anything you want to program in future so I recommend you grab it and have a look at the table that I mentioned for transaction key programming on the CASH button

Posted on Jul 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program discount on Casio TE-2400 cash register


No need to program it. It is enabled by default. For a percentage discount, just type the percentage eg 10 then press %- button. For amount discount, type the dollar amount eg 2000 (no decimal) then press - button.

Dec 20, 2015 | Casio Parts Cash Register PC Desktop

1 Answer

How do I program a MISC key on a Casio TE-2400 cash register?


You just use one of the item buttons. Re-name it to MISC then when you use it in REG mode, type a price each time and press MISC. This is the standard way to make a MISC button Make sure you don't use a decimal point when entering prices. Hope that makes sense

Mar 28, 2013 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400 buttons


These three things are all non standard for cash registers and will require codes that I don't have. they can probably be achieved but it will require the machine setting tables from the manual to set the options. My notes are incomplete in this area. I can tell you what to look for if you are able to obtain the dealer manual

Jul 19, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Casio Cash Register TE-2400


You don't need to use the PLU button when operating in REG mode. The PLU button works like a flat PLU button except it allows code entry, so if you press flat PLU button 27, it is the same as typing 27 and pressing PLU. The PLU button is used to access the PLUs that aren't on the keyboard as flat PLUs. Since the machine has a lot more than the approx 70 flat PLUs on the keyboard, you would use codes and the PLU button to look up the others. The reason you needed to put the PLU button back was to allow us to use it in program mode where it is used to call up a PLU for editing (in this case to change dept link). The departments do not need to be on the keyboard. they are really just placeholders in the machine that total up the linked PLUs so you will only see them on your daily report when it has totalled at the end of the day. Try linking a PLU to a department as I showed you before. Then use that PLU in REG mode. Then do a daily report and it should show a sale in the department you linked the PLU to. I know it is confusing, but just link your PLUs at this stage and then you will start to see it happen as you use the machine and take reports.

Jul 17, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Flexion1: Cash Register Casio TE-2400


You need to check that your PLU button really is a PLU button for a start. In REG mode, press 1 then the PLU button. It should register the product that is also on your first item button. If you press 2 then PLU, it should register the second product on your keyboard. If it doesn't then the PLU button has been moved from the original location. I can give you the code to replace it.
To set the NO SALE button back to location, Turn key to Program mode, 4 SUBTOTAL 41 Now press the NO SALE button on your keyboard. SUBTOTAL Now turn the key back to REG and try the NO SALE button. If it still does nothing then you probably have special programming to disallow the NO SALE command. Let me know.
There is a setting for VAT breakdown printing in the table under the heading 'TRANSACTION KEY PROGRAM' Find this in your manual and under it you will see a table with the heading <CASH>,<CHARGE>,<CHECK>. Near the bottom of the table is the breakdown setting. I assume you are familiar with this programming as you said you had tried other VAT settings. If you just want this setting turned on, use 100000 when programming. Otherwise, you will need to create a number depending upon what features you want to enable for each payment button.

Jul 12, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio TE-2400 Cash Register- Keyboard Orientation


Hi. The previous owner just had PLUs linked to the depts that suited them. to link PLUs to depts,
Turn key to Program mode.
3 SUBTOTAL
1166 SUBTOTAL
Now type the PLU number you want to link. E.g if you want to link PLU 6, then press 6 on the number pad (don't press the actual PLU, just type its number on the number pad)
Now press the button marked PLU. It should be near the other function buttons.
Now type the department number to link to. Use two digits. E.g to link to dept 5, type 05 on the number pad.
Press CASH
Press SUBTOTAL
As for NO SALE button, does it actually show the command NO SALE, or NS on the display when you press it? It may have been removed from the keyboard. Does the drawer open when you finish a sale normally?
There is normally a setting in key features for VAT breakdown on the CASH button. Make sure this is set so that it prints the breakdown. Add on means you sell at a tax exclusive price and the tax is added on to that by the register. Add in means you sell at a tax inclusive price and want the register to show how much of it was tax.
Hope this helps. See how you get on.
------------------------------------------------------------------------
If anyone needs a Casio TE2200 or TE-2400 manual, try here: http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 11, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio te-2400 cash register- making transactions


Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
Looking for a manual for a Casio TE-2200, TE-2400 cash register? Go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 10, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

Casio TE-2400 sales transactions


Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
If anyone needs a manual for a Casio TE-2400 cash register, go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 10, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

I have a problem with cash button on TE 2400 cash register.


Hi.

Try this:

Turn key to program mode.

0
CASH
SUBTOTAL
3
SUBTOTAL
0
CASH
SUBTOTAL

Mark

Apr 11, 2009 | Casio Parts Cash Register PC Desktop

2 Answers

TAKE A FORCED CONDIMENT OFF A PLU ON A CASIO TE-2400 CASH REGISTE


Hi.
Try this:

Turn key to program mode.
3 SUBTOTAL
0
PLU button
SUBTOTAL

If you had tax on this button, it will need to be set again. Just let me know if it is not calculating correctly.

Mark



Mar 14, 2009 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1635 Answers

tomferryman

Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...