Question about Baby Gear

1 Answer

I need to lower the base to its lowest setting but not sure how ?

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Remove the mattress. in all for corners you should see metal arms that are attached to the mattress support. these arms will be screwed into brackets on the crib. Unscrew all four screws and re-screw them into the lowest hole available. replace mattress and your done.

Posted on Jul 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to lower lawn mower


Cindy, if it's already at the lowest setting, you kinda / sorta answered your own question, i.e. it can't be adjusted any lower; but, as you may be aware, there is an adjuster at every wheel, and by putting all wheels at the same - lower - level, you will get a lower, mowing height; and if you've already done that, or there are no 'individual adjusters', they wheels are typically bolted to the frame and there are usually several holes to bolt the wheel to - simply un-bolt and re-bolt to achieve the lowest, preferred height.

Apr 01, 2016 | Garden

1 Answer

How to set timing and bobbin in my juki ddl-555


hi there
when you need to set timing please first make sure height of needle bar is ok. there's two mark at needle bar, the upper one is for height of needle bar: bring the needle bar at lowest position and in this case the upper mark must be equal with lower needle bar bushing.
second : set timing
move hand machine pulley at the same rotation and when the lower mark equal with lower needle bar pushing the tip of hook must be at the center of needle groove and just light touch not hit. that's all
best regards
ashraf abozid
CAIRO - EGYPT

Nov 29, 2012 | Sewing Machines

1 Answer

How to make the base lock in place.


Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45lbs. (20 kg) to raise, lower, or move the treadmill.Raise the frame until the latch knob locks into the storage
position. Make sure that the latch knob is locked in the storage position.

May 15, 2010 | Reebok T 1280 Treadmill

1 Answer

Plantronics CS55. When using the wireless headset


Echo is usually caused by the transmit (speak) level on the unit being set too high.

1. First, try lowering the volume of the telephone. If you still hear an echo, adjust the volume of the headset itself.

2. The master transmit controls of the headset are the ABCD switch settings on the bottom of the base. A is the lowest and D is the highest setting.

3. You can fine tune this setting with the plus (+) and minus (-) buttons on the back of the charging base.

4. If this doesn't fix the echo, try moving the configuration dial on the left side of the charging base. The recommended setting for most phones is 1.

Jul 10, 2009 | Plantronics CS55/HL10 Wireless Office...

1 Answer

Does not give a short enough cut


Have you always had this problem?
Have you had the blades off to sharpen?
Could the blades have been mistakenly put on upside down ?
The turned up piece goes toward the deck
Check your deck hangers to be sure they are free and not binding anywhere and to be sure they are dropping as far as they can go in the lowest deck setting.
your deck should move up and down evenly as you lower and raise it.
Unless spacers are an option for this cause i wouldnt use them.
Check the tire pressure 14 psi front 10psi rear .

hope some of this helps for you

Jun 09, 2009 | Husqvarna Lawn Tractor - 54in. Deck, 26...

1 Answer

I am getting feedback with Plantronics CS70 Wireless Headset


Echo is usually caused by the transmit (speak) level on the unit being set too high.

1. First, try lowering the volume of the telephone. If you still hear an echo, adjust the volume of the headset itself.

2. The master transmit controls of the headset are the ABCD switch settings on the bottom of the base. A is the lowest and D is the highest setting.

3. You can fine tune this setting with the plus (+) and minus (-) buttons on the back of the charging base.

4. If this doesn't fix the echo, try moving the configuration dial on the left side of the charging base. The recommended setting for most phones is 1.

Jun 05, 2009 | Plantronics CS70 Wireless Headset

1 Answer

CS60 ear peice with heavy static when in use


This may be caused by a few things.

1. Check the configuration dial on the left hand side of the base to see if another setting works better. The recommended setting for most phones is 1.

2. Make sure your speaking (transmit) level is not too high. First, try lowering the volume on the telephone. If you still hear distortion, adjust the volume of the headset. The master transmit controls are the ABCD switch settings on the bottom of the base. A is the lowest and D is the highest setting. You can fine tune this setting with the Plus (+) and minus (-) buttons on the back of the base that are above and below the picture of the microphone.

3. Double check the battery has a full charge.

The Amber Charge light on the base will flash while charging and will stay solid amber when fully charged.

3 hours = full charge

4. Make sure the headset has been paired to the base.

Jan 20, 2009 | Plantronics CS60 Professional Headset

2 Answers

Person on the other end receives a bad feed back when I am talki


This may be caused by a few things.

1. Check the configuration dial on the left hand side of the base to see if another setting works better. The recommended setting for most phones is 1.

2. Make sure your speaking (transmit) level is not too high. First, try lowering the volume on the telephone. If you still hear distortion, adjust the volume of the headset. The master transmit controls are the ABCD switch settings on the bottom of the base. A is the lowest and D is the highest setting. You can fine tune this setting with the Plus (+) and minus (-) buttons on the back of the base that are above and below the picture of the microphone.

3. Double check the battery has a full charge.

The Amber Charge light on the base will flash while charging and will stay solid amber when fully charged.

3 hours = full charge

4. Make sure the headset has been paired to the base.

Nov 28, 2008 | Plantronics PL-CS55 Wireless Headset

1 Answer

Lowering ringer volume on handset v tech 5.8 digital phone


You didn't indicate exact model of your phone. However I have indicated the procedure used for common Vtech's 5.8Ghz phones

Ringer volume
• With the handset or base in idle (off) mode, press MENU then
press ▲ or ▼ until RINGER VOLUME is shown
• Press SEL. You will hear a sample of the ringer
• Press ▲,▼ or a digit (0 through 6) You will hear a sample of
the new ringer volume and the volume bar will be increased or
decreased each time the setting is adjusted At the lowest setting
the ringer will be turned off and the display will show:
- OR -
• With the handset or base in idle (off) mode, press or of the
volume control will directly go to ringer volume menu
• Press ▲ or ▼ to adjust the ringer volume

Good Luck

Nov 11, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Plantronics CS60


1. Check the configuration dial on the left hand side of the base to see if another setting works better. The recommended setting for most phones is 1.

2. Make sure your speaking (transmit) level is not too low. First, try increasing the volume on the telephone. Secondly, the master transmit controls are the ABCD switch settings on the bottom of the base. A is the lowest and D is the highest setting. You can fine tune this setting with the Plus (+) and minus (-) buttons on the back of the base that are above and below the picture of the microphone.

3. Double check the battery has a full charge. To check press down on the headset into the base station to ensure it is in the base in the correct position.

The Amber Charge light on the base will flash while charging and will stay solid amber when fully charged.

3 hours = full charge

Aug 20, 2008 | Plantronics CS60 Professional Headset

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...