The OPR Light blinks and the unit will not run. Model KHS1232

Yeah you're missing the remote. Go back to your dealer and have them show you how it works. Yes the blinking light shows its armed.

Hope this helps Mike

dear curt.
the 1998 cars, most , many the automatic transmission
has an electronic contoller, called a TCM this does all the shifting
for you, and all cars with this, blink a light, to tell you , THERE IS AND ERROR< please SCAN me to findout.
the 1998 operartors guide explains that, (missing im sure)
it just tells you, when this light fails , get it serviced.

some cars blink the OD lamp others, ? D lamp
but Mistu, blinks N.
its a fact.
buy the opr. guide read it
or log in to alldata.com and read the transmission diagnostic page.
its there. i promise.

have any ways about this

What is the model number of your unit?

Hi,

Formatting is available only while playback is stopped.
If the OPR lamp lights red due to low remaining battery power, the player cannot be formatted.
All data stored on the player will be erased.
The Content Transfer software included with the player will also be deleted.
If necessary, download Content Transfer from the customer support web site.
The settings of shuffle playback, playlist playback, ZAPPIN playback, and AVLS (volume limit) also return to their defaults.
Follow the steps below to format the Player.
1 Unite the left and right parts to turn off the player.
2 Separate the left and right parts.
3 Press and hold the jog lever for about 15 seconds until the status lamp blinks quickly. Release the jog lever. The OPR lamp lights red.
4 Move the jog lever forward or backward within 30 seconds after the OPR lamp lights red. The status lamp turns off. The OPR lamp lights alternately green and red each time you move the jog lever.
5 Press the jog lever while the OPR lamp lights green. The OPR lamp blinks green quickly and formatting is executed. When the OPR lamp turns off, formatting is complete. If you press the jog lever while the OPR lamp lights red, or if 30 seconds have passed, formatting will be canceled.

Thanks for contacting FixYa.

Hi,

Try resetting the Walkman by pressing the RESET button located near the Jog Dial.
Press the reset button using a sharp pointed object like a ball pen. Be sure that the Walkman is playing when resetting.
Try connecting the Walkman Player to the Computer by using the stand to charge the battery and check if it works normally.
If the issue persists after resetting, try Formatting the Player back to factory defaults. Formatting the Player will erase all the files and all the settings will be back to factory default. Please be sure that a backup is there with you before formatting the player.
To Format the Player, unite the left and right parts to turn off the Player.
Separate the left and right parts.
Press and hold the jog dial for about 15 seconds until the status lamp blinks quickly.
Release the jog lamp when the OPR Lamp lights Red.
Rotate the jog dial within 30 seconds after the OPR lamp lights Red.
The status lamp turns off and the OPR Lamp lights alternately Green and Red each time you rotate the jog dial.
Press the jog dial while the OPR Lamp lights Green.
The OPR Lamp blinks Green quickly and Formatting is executed.
When the OPR Lamp turns off, formatting is complete.
If you press the jog dial while the OPR Lamp lights Red, or if 30 seconds have passed, formatting will be canceled.
This will resolve the issue.

Thanks for using FixYa.

Sounds like the control board or panel is shot. What is the model number of the unit, and serial number?

Even i also had a same problem after format a player its working good. Format your player and put songs again. thats it.

Notes:

• Formatting is only available when the player does not playback.
• If the OPR lamp lights red due to low remaining battery power, the player cannot be formatted.
• All data stored on the player will be erased.
• The Content Transfer software included with the player will also be deleted. If necessary,
  download Content Transfer from the customer support web site.

1. Unite the left and right parts to turn off the player.
2. Separate the left and right parts.
3. Press and hold the jog dial for about 15 seconds until the status lamp blinks quickly.
   Release the jog dial. The OPR lamp lights red.
4. Rotate the jog dial within 30 seconds after the OPR lamp lights red.
   The status lamp turns off. The OPR lamp lights alternately green and red each time you rotate the jog dial.
5. Press the jog dial while the OPR lamp lights green.
   The OPR lamp blinks green quickly and formatting is executed. When the OPR lamp turns off, formatting is complete. If you press the jog dial while the OPR lamp lights red, or if 30 seconds have passed, formatting will be canceled.

have a nice song for ever...!!!!!!!!!!!!!!!!!!!!!!!!

need model and make, and serial if you have it, its an error code, but without make, cant tell u!

your powersupply unit is not working properly better you send your tv to servicing.