Question about Samsung Printers & Copiers

1 Answer

How to install a toner cartridge in model ml-2510

Posted by on

  • Anonymous Apr 25, 2009

    I change the toner but the printer work like offline

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Kept installing and unstalling until it worked.The directions that came with the printer are only pictures.You need instuctions also.

Posted on Apr 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have dark streaks with all print-outs on a Samsung ML-2510. It goes away on a new cartridge.


This is a common problem with a close-to-empty cart.

A new cartridge will have even toner, and will distribute it evenly to the page.

An older toner will start to streak and line onto the page.

Another issue could be the fuser... some of the new printers have a fuser built into the cart unit... so that when you replace the cartridge it replaces the fuser as well.

A fuser can become dirty and thus not distribute toner evenly across the page.

Cheers!

Feb 23, 2011 | Samsung ML-2510 Laser Printer

1 Answer

My samsung ml 2510 wont print. seems to start up ok, although it had been taking a little longer to warm up recently


hello problem is your toner cartridge change the toner cartridge and try to print.then warming up is became ok.

Jan 13, 2011 | Samsung ML-2510 Laser Printer

1 Answer

New Samsung toner cart reads LOW


This is due to a sensor that reads the actual cartridge is defective not the actual cartridge or the cartridge is one that was refilled and thus not put back togeather the way it should have been. So its ether or a refilled cartridge or a bad sensor. Both req. repair in some sort.

Thanks for your free question, your free answer was delivered please do rate or leave some feedback.

Apr 22, 2010 | Samsung ML-2510 Laser Printer

1 Answer

Printouts on my ML-2510 have horizontal smudges. I am using the toner saver mode


kINDLY change the Toner cartridge. iF YOU FACE SAME PROBLEM UPDATE US.

Nov 11, 2009 | Samsung ML-2510 Laser Printer

2 Answers

Have you found a solution to the Samsung ml-2510 printer red error light staying problem?


There are a couple of reasons why this happen. A paper jam could have occurred. The cover might be open, try closing the
cover. There might be no paper in the tray, load paper in the tray. The toner cartridge is not installed. The printer has stopped printing due to a major error (you need to contact your manufacture for this).

Nov 11, 2009 | Samsung ML-2510 Laser Printer

1 Answer

I have replaced the toner cartridge in my newer ML-2510 printer. The quality is terrible. It looks like they forgot to fill the new toner cartridge. I did take out the cartridge thinking that I forgot...


Congratulations! You just bought an empty toner cartridge! I would return it if you can and get your money back. I recommend buying cartridges from a store so you can go complain to them if they pull something like this.

Oct 15, 2009 | Samsung ML-2510 Laser Printer

1 Answer

I have a ML-2510, I turned it on and both the red light and green light flash constantly. Will not feed or print.


The green light blinking means that it is accepting or printing data.
But, the red light is for the error messages. This blinking means there is a toner problem. 1. remove toner cartridge from printer and gently shake to redistribute any that is left, or
2. You simply have to replace the toner cartridge with a new one - this one has been exhausted.

Jul 09, 2009 | Samsung ML-2510 Laser Printer

1 Answer

Samsung printer ML 2510 series


Maybe the toner is low... According to the manual, a blinking red light:

• A minor error is occurring and
the printer is waiting for the error
to be cleared. When the problem
is cleared, the printer resumes
printing.
• The toner cartridge is low. Order
a new toner cartridge. You can
temporarily improve print quality
by redistributing the toner. See
page 8.3.
• The toner is totally exhausted.
Remove the old toner cartridge
and install a new one. See page
8.4.
• The toner cartridge reached the
end of its life.

Feb 24, 2009 | Samsung ML-2510 Laser Printer

2 Answers

Ml-2510 doesn't work any more after i unjammed paper, the Diagnose Program says the cartridge is not installed.


take out the printer see that any more paper or contact points contaminated. and any jamm in fuser area etc. and also see that toner is correctly installed or any part is broken ,

May 09, 2008 | Samsung ML-2510 Laser Printer

2 Answers

Samsung ML-2510 print problem


it is a new one cartridge or not? was it refilled?

Dec 04, 2007 | Samsung ML-2510 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...