Question about Panasonic Audio Players & Recorders
SOURCE: I get an error code
This is a protection indication. Either the power amp pac is defective or the power regulator circuit is faulty. In either case you are looking at about $40-$50 in parts plus the local labor rate for the repair.
Posted on Jul 22, 2008
The question is, do you hear any sound? Is just the display off or is the entire unit shutdown? Can you tell?
These displays are known to develope poor solder connections at the power input and ground pins. If you can solder, open up the unit (unplugged of course) and examine the pins for the display. This will be on the PC board attached to the front panel. The pins at either end of a long line of pins will be the power and ground pins. Reasolder those pins, taking care not to short the pins together and try the unit once done. If that does not resolve the problem (assuming it is just a display problem), update this with as many details as you can about the behavior of the unit and we'll look further.
Posted on Nov 18, 2009
The CD loading mechanism is out of time and has not reset correctly. This cannot be reset. The loading mechanism must be dis-asembled and rebuilt. This is not a DYI repair. Any Panasonic service center can repair this for you.
Posted on Jul 07, 2010
Tips for a great answer:
Aug 17, 2015 | Panasonic Technics Sa-gx170 Av Control...
Aug 03, 2011 | Panasonic SA-XR15 Receiver
Jun 16, 2011 | Panasonic Audio Players & Recorders
Mar 10, 2011 | Audio Players & Recorders
Dec 18, 2010 | Audio Players & Recorders
Jul 06, 2010 | Panasonic Audio Players & Recorders
Apr 18, 2009 | Audio Players & Recorders
Apr 17, 2008 | Audio Players & Recorders
287 people viewed this question
Usually answered in minutes!