Question about LG RU-44SZ63D Television

Open Question

LG RU-44SZ63D - Temperature is too high

I have a LG RU-44SZ63D television that displays, 'Temperature is too high'

Posted by on

  • Anonymous Jun 22, 2008

    I have the same problem.

×

3 Suggested Answers

tvtechnician
  • 105 Answers

SOURCE: Changed the lamp, now it won't power on

are there any lights blinking or solid? red or green?

Posted on Nov 04, 2007

  • 476 Answers

SOURCE: I have a lg dlp projection tv that while i was

Lets statrt with the obvious, did the lamp that you replaced showed any type of damage(blown, broken) and when you put in the replacement lamp did you also replaced the lamp cover? or at least remembered to activate the door switch? these tvs have a starter board if everything checks out see if you get any type of activation sound whent you turn the power on, kind of a click sound and another thing to look for is the ventilation fan, is it activating when you push the power button?

Posted on Sep 05, 2009

welcomejee
  • 10594 Answers

SOURCE: I have an LG ru-44sz63d

Hi,
If tv shows black and white picture after pop sound then color wheel in light engine got broken.
You need qualified tech to get it replaced because it is complicated job and some times complete color engine need to be replaced.
Let me know if you have additional question.
Thanks.

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IT NEEDS A PICTURE TUBE, WHERE DO I FIND ONE?


The model you listed is a rear projection DLP set that uses a lamp and not a CRT. The part number for the lamp is 6912B22007A and is just the bulb itself. Meaning when your go to replace it you have to remove the old lamp from its housing and carefully install the new bulb in the old housing. You will want to use latex gloves so you don't leave fingerprints on the new lamp as it will shorten the life if it.

Sep 08, 2010 | LG RU-44SZ63D Television

2 Answers

TV shows high temperature on screen


hello do you have the manual for this tv set???

Mar 05, 2008 | LG RU-44SZ63D Television

1 Answer

Changed the lamp, now it won't power on


are there any lights blinking or solid? red or green?

Nov 03, 2007 | LG RU-44SZ63D Television

3 Answers

Lg tv problems ru44sz63d It turns on to a


http://www.retrevo.com/support/LG-RU-44SZ63D-TVs-manual/id/371ci555/t/2/
http://www.eserviceinfo.com/index.php?what=search2&searchstring=J52A+(projection)

Above are links for your service manual, and a training manual. This is a classic switchmode power supply, shutting down to avoid a fire, explosion, or both. This set had developed a problem, that is so severe that the set must be shut down, This set should be removed from the Power, and in my professional recommendation, you should get a "Quote" for repair, from, an Akai, Approved Service Center, this point is very important for a good result, Always contact, their local, "Head Office" Now, when you get the information you want, then you can decide as to repair of replacement. The reason we want an approved agent, is that way, all the engineers are trained on their own brand sets, they have seen almost all faults, and will get the job done quicker, and for less cost, and usually have parts on hand, also sometimes, there has been a service bulletin in issued and the repair may be subsided or even free.

May 13, 2010 | LG RU-44SZ63D Television

1 Answer

I have a lg dlp projection tv that while i was watching it it just popped and shut off. thought it was a bulb so i change that but nothing. what is happening is when i turn the power button on the yellow...


Lets statrt with the obvious, did the lamp that you replaced showed any type of damage(blown, broken) and when you put in the replacement lamp did you also replaced the lamp cover? or at least remembered to activate the door switch? these tvs have a starter board if everything checks out see if you get any type of activation sound whent you turn the power on, kind of a click sound and another thing to look for is the ventilation fan, is it activating when you push the power button?

Sep 05, 2009 | LG RU-44SZ63D Television

2 Answers

Tv went to black and white


It may be a wire has come loose. Check your video inputs. Especially if you have animals or small children. On certain video inputs you lose color if one wire comes loose.

Jul 20, 2009 | LG RU-44SZ63D Television

1 Answer

Problem in my hdtv


orange light on front of tv means lamp is about to fail. I just had to replace mine

Jul 26, 2008 | LG RU-44SZ63D Television

1 Answer

Lamp timer


the password according to the lg service dept is 7777

Jun 14, 2008 | LG RU-44SZ63D Television

Not finding what you are looking for?
LG RU-44SZ63D Television Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...