Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Staart button will not beep all others do but will not start unless unplug then says op

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 526 Answers

Jim I feel you have lost signaling thru the Left Hand Lid Lock and or a Lid magnet out of posiston.

See this post to get you started; Left Hand Lid Lock Troubleshooting

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference.

Let me know if I can help.......D*ick

Posted on Jul 16, 2010

  • FAV6800A FAV9800A
    FAV6800A FAV9800A Jul 16, 2010

    Also you can place a couple of magnets over the Left bumper to check if the Lid magnet is out of posistion if it is the OP error code will clear.



    It's rare but is does happen.......D*ick









×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

H0w do i unplug a factory alarm on 2002 chevy tahoe


follow this link to see how to disable the alarm for gm

https://www.youtube.com/watch?v=rrrbpdplecg

there are others as well if this isn't what you need.

Jan 20, 2015 | 2002 Chevrolet Tahoe

1 Answer

Pictures how to set crank pulley timing markings of a Honda Ballade 150 pop up lights 1988 automatic


Ek het n honda ballade 150 ek het vir hom n ander kaberytor op ge sit nou sukkel hy om te staart en as hy stard dan mis hy wat kan voud wees

Jun 18, 2013 | Cars & Trucks

1 Answer

The Whirlpool Dishwasher GU 2400 won't staart


Sometimes I have to push the cancel button on my Kitchenaid and start over and push the selection buttons again. and then push start. Don't know if this will help.

Jan 07, 2012 | Whirlpool Dishwashers

1 Answer

OP Flashing,beeps everytime I turn it on, lid will not lock.


I have to do a quick response take a look at this link http://www.fixya.com/support/t4615995-op_code_lid_closed and see if it will get you started.........Rich

May 09, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Brother MFC-685cw stuck shutting down/standing by


Hold down that on/off button for at least 10 seconds without pushing any other buttons, wait after you release it and it should either wake up or shut down.

Aug 26, 2009 | Brother MFC-685cw InkJet Printer

1 Answer

REAR PROJECTION HDTV ISSUE


Decoding the number of beeps may be possible with the owner's guide but this type of problem is normally due to a failed power supply.
These are often mounted on separate boards located in the bottom of your set and can be identified by the much larger parts you see on the board and possibly its relationship to the AC cord coming in. While these can be repaired, the cost of that will approach the cost of a new assembly.
Unfortunately, modern, more energy-efficient power supplies have some critical components that if bought cheap, don't last very long and frankly, 5 years isn't bad, I read of many dead within the first year.

Jul 06, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

"OP" ERROR CODE


Take a look at this post, it’s for troubleshooting an OD alarm but you can follow the same troubleshooting path to see if you have a lid magnet out of position or a broken lead on the magnetic reed relay located in the left lid lock. The lid magnet operates the magnetic reed relay to signal the lid is closed/the lid is open. Try an external magnet on the left bumper and see if that clears the OP error code with the lid open. If it doesn’t I would try reseating the left lid lock plug (possible corrosion issues). If that doesn’t clear the OP alarm it would be time to pull the life lid lock out of the machine and inspect for a broken lead on the magnetic reed relay or other corrosion issues with the left lid lock. The left lid lock is in a location near the bleach dispenser. Links to the SM are in that post and a link for parts look up. Post back if you have questions

Jun 23, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Windows is switch of during startup with one beep on systeem speaker


just take out the RAM clean it and try if it not works then try it in another slot it may be alright

May 06, 2009 | Asrock K7VM2 Motherboard

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...