Question about PC Desktops

1 Answer

Hi...unable to connect to ps3 using siemans gigaset se587 wireless router

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Hi there,
first you need to make sure u can access your wireless router with no problems and the wireless is turned on for your ps-3...then u need to forward some ports...

Turn on PS3 and goto Settings, Network Settings.
Select Internet Connections. If it asks you want to be disconnected select Yes. Select EASY. Select wireless

Select SCAN this will take a few minutes. The PS3 should find your router and already have the SSID# so just type in your WEP key. Select save and then wait a couple of minutes then select test. It should hook up.

If it hooks up with NAT3 then you will have to enable UPnP on you router. type in http://192.168.1.1 on your computers web browser.

username: admin
password: admin

Click on the advanced tab and then on Universal plug n play and then make sure both check boxes are marked.

Then on the PS3 make sure the UPnP is enabled also in the network settings.

This should give you network and NAT2.

please try this link for port forwarding help:-

http://www.portforward.com/english/routers/port_forwarding/Siemens/GigasetSE587/PS3_NAT_Type_3_to_2.htm

Posted on Apr 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Siemens gigaset se587


read the router manual. then ask your question.

Mar 29, 2014 | PC Desktops

1 Answer

Cannot connect ps3 to Gigaset SE587 router


Before you test you connection see what the percentage of the connection is, if it's less then %50 it won't work with wireless unless you move it into a place with a better connection

Jul 15, 2009 | Sony PC Desktops

1 Answer

I just recieved my Siemens Gigaset SE587 WLAN dsl router and i set it up but the only light coming on is the power light,is the router faulty or damaged?


Are all the cables connected correctly?
Are the DSL settings in?

If it's only the power light, and no WLAN, LAN, DSL or Internet lights on, it sounds like it may be faulty. Is it brand new or second hand?

Aug 22, 2008 | Siemens PC Desktops

1 Answer

How to setup port forwarding on gigaset se587 router


Hi - You can get an online guide on the link below:

Gigaset se587

Please update the question & let us know if the information given was useful to you - Good Luck!

Jul 04, 2008 | Siemens PC Desktops

1 Answer

My wireless keeps disconnecting what can i do to fix the problem i will be doing things on the internet and then my icon goes off i have a links system and during the day it wont let me hook up to the...


The 6 times I have come across this:

1. Bad/Faulty wireless adaptor/card (twice)
2. Was using a Siemans SpeedStream Gigaset SE567 Wireless DSL Modem - (its junk and once changed out for a another brand it was resolved) (4 times) This modem has a miriad of other problems also that was solved by getting a different brand.

Jul 03, 2008 | PC Desktops

1 Answer

Siemens gigaset se587 4 port wireless router will not connect to my computer. Error code 106 keeps comming up. any solutions?


Go into 'control panel' then 'network connections' and right click on your 'local area connection'. Select 'internet protocol' at the bottom of the list and click on 'properties'. Ensure that 'Obtain an IP address automatically' is selected. Run through the installation disk again and my guess is it will work. Despite this being relatively simple no one at tiscali suggested this over the course of 2 weeks which I found astonishing.

Apr 10, 2008 | PC Desktops

1 Answer

Wireless internet


The other unit needs a wireless adapter to talk to the router wirelessly

make sure that the wireless function is turned on in the router software ,

you need to enter an IP address in the internet explorer to get into the router, (this should be in the manual or printed on the base of the unit).

you will need to enter a user name and password, (read the manual for these), sometimes, admin admin ,or admin password)

if you used a security key, make sure it is in the wireless software, of the wireless pc/laptop

good luck
Terry

Mar 25, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...