Question about Nordic Track Exercise & Fitness

1 Answer

NordicTrack 2500 R Treadmill Doesnt want to start rolling, even though the program appears to be running on the display. And on the rare occasion it does start, it stops again after 2-3 minutes.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 218 Answers

# get a 12-18 volt dc battery fully charged(like one from a cordless drill)
# Make sure it is fully charged, because it won't work if not
# attach the + and - to the motor red is + and black is -
# If the motor turns slightly your motor is ok, if not the motor is bad and would need replaced
# if the motor is ok then your motor controller(the board with the metal) is malfunctioning and would need replaced.

Posted on Aug 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Treadmill starts then as the belt first begins to roll the it shuts down again right away


Mybe the belt is to lose see if you can ajust the tension of the Belt also to ake sure that it runs straight.

Jan 09, 2015 | Nordic Track Nordictrack C2100 Treadmill...

1 Answer

In demo mode wont start regular program.


12_12_2011_7_03_17_pm.gifadjust by 1/8" ,tight the flexible cable form keypanel vs display board , then display board vis main motor board(lower board). Exchange batteries new from console.

Dec 12, 2011 | Nordic Track NordicTrack T7 si Treadmill

1 Answer

Every time I put the key in my Proform 590T, the incline rises for a second, and lowers for a second while displaying 2 hash marks. Then, the home screen comes. All speeds work fine for walking/running,...


how long have you had this treadmill? usually when the hash marks appear it means that the console control board is not recognizing the incline motor. even though it does run a little bit that is just the basic test that the treadmill starts but resets after it does not sense the incline motor. These motors rarely go bad so it is more than likely your motor controller that is causing the issue. I have seen this case many times as i am a fitness repair technician. The motor controller fixes the issue 9 times out of 10

Aug 05, 2010 | Proform 590T Treadmill

1 Answer

Does the Nordi Track Commercial zs Treadmill have a 3.0 CHP


It is continuous. Some manufacturers used to say just "horsepower," when "continuous" horsepower was really a better measure. Consumers picked up on this and started asking your question. Now the horsepower quoted by almost all brands, including NordicTrack, os continuous. However, they got lots of consumers asking "What does 'continuous' mean? so now they just say "horsepower," even though it is "continuous" horsepower! For a full explanation of what this means, see treadmill answers.

May 08, 2010 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Belt doesnt work when I hit the start button


Sounds like the motor control board. Everything will work properly but belt want move. Clock will even start to count down.

Nov 16, 2009 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Nordictrack motor will not run when start button is pushed.


Likely the cover of one of the motor brushes popped off. Unplug the machine before you pop it back in place, then try it again.

If that doesn't work, most likely it's the motor control board, or possibly the console, or finally just a loose connection behind the console.


But most likely, it's the motor brush cover. I've been seeing that alot with this model.

Oct 29, 2009 | Nordic Track NordicTrack Treadmill, A2550

2 Answers

A2350 doesn't start, just cycles through programs on display


This is just the store display mode it comes with - check the manual, it should tell you how to easily turn off the store display mode.

Jun 20, 2009 | Nordic Track NordicTrack Treadmill, A2550

2 Answers

My treadmill will go normal speed set at until you start walking on it and then it slow way down. Why would it do that?


Try looking for a problem in the power.if that doesnt work,send it to a technician or if you had a warranty on it even better.

Jun 15, 2009 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...