Question about Mitsubishi VS-5043 50" Rear Projection Television

1 Answer

When power button is pushed green light will come on for a few seconds and then go off. no sound or picture

Posted by on

  • harnerl Jul 15, 2010

    thanks, i will probably have someone else change the p-supply

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems, to activate this turn the unit on let it shutdown then press the input/or device and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times.

Let me know,so that we could Proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Jul 15, 2010

  • harnerl Jul 15, 2010

    tried your suggestion and nothing happened, no blinks from the LED

  • taran_2005
    taran_2005 Jul 15, 2010

    Thanks for your response!!

    If there is no proper sequence or No LED's blinking, it is highly suggestive of ' faulty power supply unit '.If you have experience in repairing TV, could read schematics, know how to use multimeter and soldering iron and keep all precautions, i would be more than happy to provide you few pointers to repair this. This is almost certain to be a hardware failure.

    Let me know,so that we could
    Proceed.

    Hope i helped you.

    Thanks for using ' Fixya '
    and have a nice day!!









×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer does not print


Instructions
    • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
    • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
    • 3 Release "Stop/Reset" while holding down the "Power" button.
    • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
    • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
    • 6 Push the "Power" button, then lift the MX310 cover open.
    • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
    • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Jul 23, 2014 | Canon PIXMA MX310 All-In-One Printer

1 Answer

No Picture/No Sound


This is very possibly a power surge, can you tell me how many times the light blinks, you probably have a bad power board now if you had a power surge.

Aug 11, 2007 | RCA HD52W59 HDTV Projection Television

1 Answer

When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


Please reset the Printer by following these steps:

Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

Release "Stop/Reset" while holding down the "Power" button.

Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

Push the "Power" button, then lift the MX310 cover open.

Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Feb 27, 2011 | Canon MX310 Office All-In-One Printer

2 Answers

My Loewe Aconda TV will not turn on - buzzing noise.


My Loewe Aconda 81 HDR TV will not turn on. When I press the power button the green light comes on but the red light stays on with it and after a few seconds the green light goes out and the red light stays on. Any help please.

May 15, 2010 | Loewe Aconda ACO9383 38" TV

1 Answer

Blinking green reset light


Can you please supply us with the make and model as well as the blink count of the green light. That count should be indicating the problem circuit. Once that info is posted, we should be able to give you more details and possible solutions.
Dan

Jun 19, 2008 | Televison & Video

1 Answer

Push Power button, green light goes on for a few seconds then nothing....


I would suggest taking a look at the power module if that can be replaced. The Fuse blowing may have only been the beginning of the problem. Any recent issues with under or over voltage in your home?

Jan 20, 2007 | Mitsubishi VS-60601 60" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...