Question about Panasonic Heating & Cooling

2 Answers

Panasonic CS-W24DKR/CU-W24DKR not responding to remote control

We have a Panasonic CS-W24DKR/CU-W24DKR split unit heatpump/Airco. The problem is that the unit has stopped responding to the remote control. The remote seems to be working as it should and seems to be sending the signals, but no beeps (which it usually does when you use the remote) from the wall unit and no response. Tried fresh batteries and resetting the remote, both no joy :-( ! Any suggestions ?

Posted by on

  • Silver Wing Dec 29, 2011

    Thanx Alan, much appreciated !

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To easily test remote,turn mobile phone camera on and operate remote with infe red end looking at phone camera,if remote is working you will see a white light on camera,if u get a light on camera reciever in wall unit may be faulty.
alan @zia airconditioning.
good luck

Posted on Dec 28, 2011

  • Silver Wing Dec 29, 2011

    Thanx Alan, much appreciated !

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timer blinking.outdoor unit does not functioning. what was the error?


Looks like you said it, the outdoor unit is not working. Check for power to the outdoor unit or try cutting power to it, then after a minute restore power in attempt to reset it.

Apr 28, 2015 | Panasonic CU-E18JKK-1/CS-E18JKKW-1 Wall...

1 Answer

My Panasonic split air conditioner has stopped cooling - model:CU-W18DKR. The internal unit and internal fan operate normally. The external unit fan does not run like normal and no compressor sounds f


Sounds like a faulty outdoor controller board. If you are in Australia, call Prime Electronics or Statewide Appliances for spares.
Part number: NPCWA743383

• To make a diagnosis
1. Timer LED start to blink and the unit automatically stops the operation.
2. Press the CHECK button on the remote controller continuously for 5 seconds.
3. "- -" will be displayed on the remote controller display.
Note: Display only for "- -". (No transmitting signal, no
receiving sound and no Power LED blinking.)
4. Press the "TIMER" or button on the remote controller. The code "H00" (no abnormality) will be displayed and signal will be transmitted to the main unit.
5. Every press of the button (up or down) will increase abnormality numbers and transmit abnormality code signal to the main unit.
6. When the latest abnormality code on the main unit and code transmitted from the remote controller are matched, power LED will light up for 30 seconds and a beep sound (continuously for 4 seconds) will be heard. If no codes are matched, power LED will light up for 0.5 seconds and no sound will be heard.
7. The breakdown diagnosis mode will be canceled by pressing the CHECK button continuously for 5 seconds or without any operation the remote control for 30 seconds.
8. The LED will be off if the unit is turned off or the RESET button on the main unit is pressed.

Or better yet, get a tech to check first.

Feb 10, 2015 | Panasonic Single Split System - Wall...

1 Answer

Why when pressing the on button the airco doesn't come on


Did you changed the batteries? 99% of the time the remote problems (not working) is due to dead batteries.
Assuming you have new batteries, does the remote gives you any codes or displays abnormally? If this is the case, you might need to replace your remote. You can buy a universal remote for A/C units, either through your HVAC Repair Company, or wherever they sell A/C parts.

Sep 15, 2014 | Panasonic Heating & Cooling

1 Answer

Where is the infrared receptor card in this equipment to change it. I have a split ac panasonic CS C24BKP and does not respond to remote control. I know the remote control is good because I saw thr...


There is a receptor on the below the front pannel but the problem could be :
1.Low battery charge in the remote control.
2.The signal cable that connects the receptor to the card(pc board) could be loose/disconnected
3.Try one receptor from a working unit
4.Try a remote control from a working unit


Regards,
Adamson
nyauadamson@gmail.com

May 02, 2014 | Heating & Cooling

1 Answer

Split system not starting up for about 10 mins after turning on


Hi Wendy,
The manual for the unit is at this link. This should answer all your questions. http://panasonic.com.au/products/details.cfm?objectID=4601 then go to the bottom of the page and click on CS/CU-E18_21_24_28HKR Operation Manual

I take the time to answer you questions so please rate me
Thankyou
Mat

Jun 10, 2009 | Panasonic MCM INVERTER

1 Answer

Panasonic split system air con cs/cu-e24gkr


check the indoor unit sirkit board,there is problem.

Feb 14, 2008 | Heating & Cooling

2 Answers

Split system airconditioner Panasonic model CU-A28CKR.not responding to remote


Try turning of the power to the unit.Wait 60 seconds and try it again.This may reset the unit.

Nov 24, 2007 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Heating & Cooling Experts

Bill Long

Level 3 Expert

587 Answers

Fotis Papastamatiou

Level 2 Expert

96 Answers

Dennis Boxerman

Level 3 Expert

1144 Answers

Are you a Panasonic Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...