Question about Cameras

2 Answers

I have a Canon Power Shot A-60 camerea. I recently replaced the lithium batteries and since that time have not been able to get a clear image on the camera screen or when it is viewed on a computer, etc. It is very faint and verticle line al all across the image. When I tilt the camera forward the image clears somewhat.

Posted by on

  • Orin1 Apr 21, 2008

    Thanks. I probably need to take it in to a camera store but I will have to find out where the nearest one is. Appreciate your help.
    Orin1

  • Orin1 Apr 21, 2008

    Thanks for your input.
    Orin1

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

I believe it is the camera fault and you will have to get it serviced or if it is under warranty get it replaced.

However before giving it to repair you can try changing the settings in your camera to see if it clears the image:
Please CLICK HERE for more info.

Goodluck,
Please don't forget to rate the solution

Posted on Apr 20, 2008

  • Priya darshan Apr 21, 2008

    hi,



    To find a service center all you need to do is CLICK HERE and enter the detaila.



    Goodluck,

    Please don't forget to rate the solution

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Sound like a hardware side problem to me.

you can get a free repair estimate here
http://www.advancecamera.com/repair/

Posted on Apr 20, 2008

  • Ekse Apr 20, 2008

    Ist most likely a fault in the camera as I said earlyer, the adjustments probably have no effect on the lines.



    let me know if you need anything else.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Poor resolution with horizontal lines


This is known problem of ccd imager chip failure in Canon A95 camera, ccd imager chip will be replaced to get clear picture. It was coincidence that problem occurred at same time when you did some settings but it is not setting problem.
Canon offers free of cost ccd imager replacement.
Click Canon CCD Imager Advisory for details.

Jul 05, 2010 | Canon PowerShot A95 Digital Camera

1 Answer

Canon Optura 60 will not turn on, No lights when plugged in.Dead


never buy a canon. i have the same issue and it is not easy to fix. i dissasembled the thing already but too complicated. the lithium memory battery inside too is non user replaceable as it is illustrated in the manual. you got to have it serviced to replace it because that small battery is soldered. poor buyers....

Aug 13, 2009 | Canon Optura 60 Mini DV Digital Camcorder

1 Answer

MY COPIER SAYS "MAKING SPACE IN MEMORY" HOW DO I CLEAR THE MEMORY?


If the machine remains without power for a
specific period of time (about 2 hr or more)
while an image exists in its memory, the
power of the vanadium lithium secondary
battery (BAT2) will become exhausted. A
report will automatically be generated when
the machine is turned on.
or
When the jumper plug (JP1) is removed, all data in
control memory will be lost. Therefore, do not
disconnect the jumper plug (JP1). The data stored in
the SRAM is as follows:
- user data (data indicating user mode settings)
- service mode deta (data indicating service mode
settings)
- control data (communications control record of most
recent 20 communications, system dump record)

Jul 28, 2009 | Canon imageCLASS D860 All-In-One Laser...

1 Answer

Won't turn on


How "fresh" are the batteries. Quite often they are weak, right out of the package. We revive a lot of "dead" cameras with Energizer Lithium AA batteries. Many cameras that people are ready to write-off, are resurrected with the Energizer Lithiums. I also think that battery manufacturers are not putting as much "juice" in them as they used to.

May 19, 2009 | Kodak EasyShare C433 Digital Camera

2 Answers

Replace battery sign in New canon A590si camera.


You're using the wrong batteries. You need to purchase lithium batteries. They are quality batteries for high powered, battery operated electronics. Personally, I have a battery charger and use rechargable duracell batteries. (HR6/ DC1500/ NiMH/ 1,2V) Gives you approximately 16 hrs before having to recharge.

Dec 01, 2008 | Canon PowerShot A540 Digital Camera

1 Answer

Power shot a95 horizontal lines on image


Hello,
if its recently happened with Canon A95 camera then its CCD Imager fault and need to be replaced.
Canon has scheme to repair it free of cost. Click Canon Advisory to see details.
Bye.

Sep 11, 2008 | Canon PowerShot A95 Digital Camera

2 Answers

No power


Try another set of well batteries. I had the same problem with well known, brand new batteries and changed over to disposable AA Lithium batteries and never had the problem again. I have also found that the Lithium batteries last much longer than my rechargebles or the "six-times-longer" brand.

Jan 02, 2008 | Canon PowerShot S3 IS Digital Camera

1 Answer

Partly open lens


Has anyone tried a hard reset on their camera by removing the main power batteries for 60 seconds and the reinserting them as if it were the first time power up. This may not fix your particular problem, but when the processor that runs all of the electronic features of the camera gets confused, this is the best way to clear its confusion.
page number 114 of your manual. tell me if this works

Oct 16, 2007 | Canon PowerShot A540 Digital Camera

1 Answer

Battery life expectancy


Olympus Ni-MH batteries will last approximately 60 to 80 images and can be recharged about 500 times. The Olympus CR-V3 long-life lithium batteries provide power up to 2 times that of Ni-MH batteries. The CR-V3 long-life lithium batteries are NOT rechargeable.

Aug 31, 2005 | Olympus D-460 Zoom Digital Camera

1 Answer

Battery


Olympus Ni-MH batteries will last approximately 60 to 80 images and can be recharged about 500 times. The Olympus CR-V3 long-life lithium batteries provide power up to 2 times that of Ni-MH batteries. The CR-V3 long-life lithium batteries are NOT rechargeable.

Aug 31, 2005 | Olympus D-400 Zoom Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

101609 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...