Question about Casio Parts Cash Register PC Desktop

2 Answers

After programming the PLU Keys on a Casio TK 7000 I find that keys 037, 046 and 055 appear to have departments associated with them. When I read the Department Report I can see the values in question. I would like to know hoe to disassociate keys 037, 046 and 055 from the departments and therefore allow the PLU values to register. Many Thanks.

Posted by on

  • dale_spittle Jul 15, 2010

    I have that manual, unfortunately it does not cover this issue. I also have the Dealer Manual and the User's Manual.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 857 Answers

How to program PlU s:
Enter 1 press Subtotal (enter plu number ex 1) press PLU key (enter amount) press CA/AmtTend press Subtotal.
How to program names on department keys?
Enter 2 press Subtotal (enter letters) 00 press Dept Key press Subtotal.
For more information please follow the link below:
http://www.casio.com/support/content/D799D5A7-9C01-40E0-8D11-071A11F4A9A9#11

Posted on Jul 16, 2010

  • dale_spittle Jul 16, 2010

    I am not making my problem clear.



    I am attempting to de-program the current Department Keys, so that I can use them as ordinary PLU's.





    TIA, Dale.

  • Jayant Jha Jul 16, 2010

    To do that you will have to reset your device if you do it This will erase all information - with the PGM key at Off press and hold down the Feed button, while holding the Feed button turn the PGM key doen to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros.



    After doing this you can reprogram according to your wish.



    To program the department keys again:

    Enter 1 press Subtotal press T/s1 press each Dept key that is taxable press N/S press each dept that is tax exempt press Subtotal.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Contributor
  • 1,070 Answers

Welcome to FixYa
Sir,
I hope you can easily find out Solution by looking this Easy reference guide here
Thanks for Contacting Fixya...

Posted on Jul 15, 2010

  • dale_spittle Jul 15, 2010

    I have that manual, unfortunately it does not cover this issue. I also have the Dealer Manual and the User's Manual.



    Thanks for your time.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Casio tk-7000 scanning and PLU programming


You can add a Hand held Scannerbar with your Casio Tk -7000
Hand held bar code scanner(HHS-15) *

Essential functions for the scanning environment such as Not Found PLU(NFP),PLU batch maintenance file,bottle link and Mix & Match functions are available on the TK-7000 model.

You can attach a Voyager Scanner with your TK-7000 model.

How to add in Casio Cash Register:
1. connection to cash register - unscrew and screw back in.
2. connection to scanner, unplug using paper clip into hole and push back in again.
3. rescan default sheet given whe nyou purchased the machine.
4. clean head of scanner.
5. check for cracks on scanner, ie. loss of vacuum.

For MOre Information visit the following sites:
1. Multisoft India
2. Cash Register
3. Bar Code Basic
4. Scanner Model
5. Casio 7000

Regards
Ellin


Oct 07, 2008 | Casio Parts Cash Register PC Desktop

5 Answers

Casio tk-7000 scanning


Yes, the PLU number for each item will first have to be programmed into the machine before it can recognize any barcode.

Oct 03, 2008 | Computers & Internet

1 Answer

Have a casio tk6000 cash register and I want to change what department the flat plu


Hi Ray Jump,

I am not 100% on the TK 6000 but on the TK2300 you turn the key to PGM press 3 subtotal, 1166 subtotal, XX00 (xx being department number) press all of the PLU's you wish to change and press subtotal to finish.

Good Luck

May 30, 2012 | Casio Parts Cash Register PC Desktop

1 Answer

How do I program extra departments into a Casio TK - T200. I need 22 Dept Keys


The TK-T200 comes with 30 Flat PLU buttons. These can be set to open price if you want to use them as departments. To remove the fixed price, Turn key to program mode 0 now press the PLU button you want to change SUBTOTAL
Now you will need to enter a price (no decimal point) each time you use it in REG mode.
If this is not suitable, please let me know more information about your needs.
-------------------------------------------------------------------
If anyone needs a manual for a Casio TK-T200 cash register,
http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-T200_users_and_programming_manual.html

http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-T200_service_manual.html

Aug 04, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

E026 error message Casio TK-7000


find out what plu it is then re pgm it

turn the key to PGM
enter 3 & press Subtotal
enter 0166 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal

enter 1066 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal
turn the key back to Reg

Dec 23, 2008 | Casio Parts Cash Register PC Desktop

1 Answer

How do I allocate PLUs to departments on my CASIO TK-7000?


take a readout of the department and groups first
pgm6
205 subtotal
1 cash 30 cash
this will print out your departments

pgm6
206 subtotal
this will print out your groups

pgm3
1166 subtotal
enter your 6 digit number then press all the products linked to that department / group

your 6 digit number = DDGG00 DD= Department GG= Group
then 00
so for dept 1 gp 1 = 010100

when finished
press subtotal

Dec 07, 2008 | Casio Parts Cash Register PC Desktop

1 Answer

Casio tk-7000 scanning and PLU programming


I think I see what you are trying to do here
plu codes http://en.wikipedia.org/wiki/Price_Look-Up

these plu codes are for networked tills where prices are controlled by the till server (a central list of prices used by all tills)

whereas I think you are trying to assign prioces to individual keys, and therefore you should use this guide. to program the prices to the keys

http://www.calcullus.co.nz/Manuals/Casio%20TK-xxxx.pdf

I hope this helps

Oct 04, 2008 | Computers & Internet

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1646 Answers

tomferryman

Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...