Question about Rangemaster Toledo 90 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range

1 Answer

Auto timer for toledo 90

I have lost the manual and dont know how to set the timer so I can put things in the oven when I go to work and they are cooked when I return that night. any idea.

Thanks

Posted by on

  • pvwheeler Sep 25, 2008

    I had the same problem. We cannot set the clock to the right time.Please help.Thank you.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 842 Answers

All you need is on my artcle http://www.fixya.com/support/t1416237-timer_instructions_rangemaster_toledo

Hope this helps (Leave feedback if it does please)

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our cooker has stopped working and auto is flashing


If auto is flashing, i would say the oven is waiting on a clock time to be set to determine when to start cooking and when to turn off. Try and reprogramme the oven to manual. Reset the clock time, It should work then.

Oct 18, 2014 | Rangemaster Toledo 110 (Dual Fuel) Dual...

1 Answer

Setting the clock


To set the time, turn and hold the Timer knob to the clock
symbol = and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.

Dec 05, 2012 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

We bought a brand new dual fuel Rangemaster cooker and the adaptation of our bungalow and building works have now been completed and ready for the cooker to be installed. However, my husband ( who has a...


I used to have the same range with 2 electric ovens, but it is available with the lower large oven on gas and the tall oven electric.

The manual for theToledo with tall electric and large gas oven can be found here:

http://www.rangemaster.co.uk/Siteimages/Site_311/BigMedia/Toledo90Gas.pdf

The manual for theToledo with both electric ovens can be found here:

http://www.rangemaster.co.uk/media/575792/toledo%2090%20dual%20fuel.pdf

The main product page for the toledo 90 can be found here:

http://www.rangemaster.co.uk/range-cooking/toledo-90.aspx

Sep 16, 2011 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

I have 0.00 and aoto flashing on and off.


After a power failure most digital clocks have the zero's and auto flashing. These ovens will not work if clock(time of day) is not set. By pressing incorrect buttons, you can complicate things further. Recommend turning off power to oven for a few seconds, then follow manual for resetting clock, which is usually holding down the 2 buttons on the left hand side simultaneously, and holding down these two press the + or - key to advance clock.

May 21, 2009 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

Timer instructions for a Rangemaster Toledo dual fuel 90 required


OK, here we go, this is actually a fairly lengthy explanation, but I will do what I can to explain.
The timer can be used to turn just one, or both ovens on and off automatically, however the start and stop time must be the same for both ovens, though different cooking temperatures can of course be set, so if you play around with temperatures to extend the cooking time of an item in one oven, you can often cook items needing very different settings for the fixed time you set in both ovens. Note that when the timer is on and the AUTO message is on the display, the ovens are disabled and will ONLY work during the timed period unless the timer is disabled again. (This is a common problem when you first power up, because the AUTO setting is automatically engaged on installation or power up after a power cut, disabling the ovens until you figure this out!). So, with all that garbage out of the way, how to use the timer settings:

For ease of understanding, I will refer to the buttons on the control pannel (Running from Left to Right as: BELL, HOT DISH, COLD DISH, HAND, + and -)

TO TIME SOMETHING THAT'S ALREADY COOKING (Minute Minder). Press and hold down the BELL symbol (Far left), use the + or - to adjust the amount of time you want to cook for (You can check time remaining at any point, or cancel the beeper when the time is up, by pressing the bell button.

TO STOP AUTOMATICALLY AFTER YOU HAVE MANUALLY STARTED COOKING. Press and hold the COLD DISH button at the same time use + and - to adjust your required stop time. AUTO will show on the display. When cooking is finished, the beeper sounds. TURN THE OVEN TEMPERATURE KNOB TO "0" FIRST, then press the HAND button, once to stop the beeper, and again to cancel auto and return to manual mode.

TO START AND STOP THE OVEN MANUALLY: Before you start, decide when you want the cooking to stop and how long you want the food to cook for (The cooker will work back from your stop time and figure out the START time for its self.). Press and hold down the HOT DISH button and at the same time set the minutes and hours you want the oven to cook for with the + and - buttons (You are NOT SETTING THE TIME HERE, you are setting how many minutes and hours to cook. Next, press and hold the COLD DISH button and use the + and - to set the stop time (YOU ARE SETTING A TIME IN THIS OPERATION). AUTO will show on the display. Set the temperature for the oven (or both ovens) that you want to auto cook with. When cooking stops the beeper sounds. Press the HAND button to cancel the beeper and press the HAND again to cancel AUTO and return to manual mode. (Note that the beeper stops after a while if you leave the oven attended, but the manual states you still have to press the HAND button twice to return to manual, I have not personally tested this).
GETTING BACK TO MANUAL MODE. If AUTO is showing on the display, because you have set automatic and no do not need it, or you have just powered the cooker up, any cooking time already set must be returned to 0:00 before you can return to manual, so hold down the HOT DISH button and ensure the display is set to 0:00, once you gave done this you can press the HAND button to return to manual mode

Dec 22, 2008 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

Rangemaster classic 90


Regardless of the clock running, if the timer is not set to zero and off, the oven will not function. See my instructions on using the timer (http://www.fixya.com/support/t1416237-timer_instructions_rangemaster_toledo) I hope that this is your problem and it will show you how to get the oven going again.

Aug 10, 2008 | Rangemaster Toledo 90 (Dual Fuel) Dual...

2 Answers

Rangemaster Toledo


we had the same problem - a power cut then the clock flashed up 'auto' preventing the oven from working.
After downloading the manual from the rangemaster website we learnt that all you need to do (for the classic dual fuel anyway) is to press in the 2 buttons on the left and set the time using the + or - keys. Dead easy and Christmas dinner is back on!

Sep 02, 2007 | Rangemaster Elan 90 (Dual Fuel) Dual Fuel...

Not finding what you are looking for?
Rangemaster Toledo 90 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

paulcarew

Level 3 Expert

1875 Answers

Mike Carew

Level 3 Expert

958 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...