Question about Heating & Cooling
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Pilot lighted furnaces have a thermocouple made from disasimilar metals that when heated create electricity to actuate a relay that alows the gas to flow to the furnace.
When the thermocouple gets coated with carbon from the pilot lights constant burning it acts as an insulator and keeps the thermocouple from getting enough heat to generate electricity, a very good safety factor.
What you have to do is locate the thermocouple it should be located over the pilot light, you will see a gray substance around the thermocouple it will be hard like cement, take a knife and scrape away as much of the gray material as possible then sand the themocouple with a medium sandpaper until it shines, use one of you wifes emery boards, this should solve your problem.
Posted on Feb 24, 2009
SOURCE: Pilot light keeps going out
THERMO COUPLER PREHAPS, BUT USAULLY THEY WORK OR THEY DONT, I WOULD CHECK FOR BACK DRAFTING AND PROPER MAKE UP AIR FIRST, FOR EVERY B.T.U. 1 SQUARE INCH OF FRESH AIR IS NEEDED.
Posted on Jan 20, 2010
undo small screws between the two panels just above the bottom door
open out and pull the top hinge wire down in a u shape it will come out
Posted on Mar 22, 2010
Tips for a great answer:
Aug 16, 2016 | Convair Heating & Cooling
Dec 05, 2015 | Dayton Gas Furnace Heater
May 13, 2011 | Convair Heating & Cooling
Sep 05, 2010 | Heating & Cooling
Nov 13, 2009 | Convair Heating & Cooling
Apr 28, 2009 | Heating & Cooling
Feb 24, 2009 | Dayton (4LX41) Heater
Dec 04, 2007 | Heating & Cooling
45 people viewed this question
Usually answered in minutes!