Question about Vacuums

1 Answer

Fitting belt to dyson dc04 - Vacuums

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fit to clog first then struggle to get over brush roller. Make sure it lines up in the groove or you will get through them really quickly.

Posted on Jan 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i use the hose attachment on my dyson dc04


Hi Sarah,

For advice on using the hose, wand and accessories, please refer to the DC04 user guide. In case you don't have this to hand, you can download a copy here:

http://media.dyson.com/downloads/UK/floorcare/Manuals/dc04_gen_manual_uk.pdf

You may also find our Support page useful - just select your model from the list to view troubleshooting guides for advice on using and maintaining your machine:

http://support.dyson.co.uk/Support/Uprights.aspx

I hope this helps - if you'd like any further assistance or advice, please call us free on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Feb 12, 2012 | Dyson DC04 HEPA Bagless Upright Cyclonic...

1 Answer

I have a Dyson DC04 brush control and it sometimes jumps of the carpet on the back stroke when vacuuming. I have checked the belts and the brush and all seems well. Could this be wear and tear on the...


Hi there,

Sorry to hear you're having difficulties with your DC04. You might find it helpful to run through this step-by-step troubleshooting guide to make sure the soleplate is correctly fitted, and that there are no blockages in the cleaner:

http://www.dyson.co.uk/support/help.asp?article=89&product=DC04-SY-STD-BC

If you've tried this and are still concerned, it's probably best if you get in touch with us directly. One of our experts will be happy to run through some troubleshooting over the phone with you, and recommend the best course of action. You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week.

Kind regards,

Jack
Dyson Customer Service

Aug 14, 2011 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

How do I replace the belts on a Dyson DC04 purple


That model has a clutch unit from which the two drive belts are located. It is a technical job to strip that unit down to change the belts, so the easier solution if you have a snapped belt, is to replace the clutch unit (that comes with belts on it). A recycled one represents better value for money, and you can get one here: Dyson DC04 clutch unit.

Nov 07, 2010 | Dyson DC04 HEPA Bagless Upright Cyclonic...

1 Answer

My belt has snaped on my dyson dc04 that has a clutch how do i change it


Remove the roller brush cover plate that is on the bottom and you will be able to access the belts. Here are the belts you need:

Dyson DC04 Belts

Nov 18, 2009 | Vacuums

1 Answer

Roller does not turn


It sounds as though you need to replace the drive belt. The necessary part is available from http://www.espares.co.uk/dyson/dc04/p/1086/716/4. Fitting it is tricky, but guidance is available from http://www.dysonmedic.com/DC04%20Folder/DC04%20belt%20change.html

Aug 02, 2009 | Dyson DC14 Bagless Upright Cyclonic Vacuum

1 Answer

Fit new belt to clutch on dyson DC04


Bad news regarding all Dyson's. You can't replace just the belt your self. You have to purchase a new belt assembly which includes the gears. And it wont be cheap. I would call it a design flaw but i am sure that dyson calls it a profit scheme.

Dec 07, 2008 | Vacuums

2 Answers

Brushes not going round


The brushes on my dyson have stopped going round. I have checked it and they move freely by hand. The belt is intact. What could the problem be? The Hoover is about 10 to 12 years old.
My dyson is a dc04


I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
One of the main problems with vacuums are that the flat belts on the vacuums stretch and should be changed every 4 to 6 months or 3 or 4 times a year – you can tell by taking off the belt or belts on the vacuums and compare them to the old belts on the vacuum the new belts will fix inside of the old belts and you will be able to see the difference on how much they have stretched – if the belt is a geared belt – they stretch as well but should be changed about one a year – the cost is not that expensive and you cleaning will improve almost double – this also applies for the Dyson DC04 and the Hoover vacuum as well – some of the Hoover vacuums have two (2) belts and they both should be changed @ the same time.

Apr 15, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...