Question about Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver

Open Question

Keyless chuck is stuck in open position and won't close

Dewalt XRP hammerdrill 18 volt

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10865 Answers

SOURCE: dewalt 18 volt cordless drill

Use a pipe wrench on it to give yourself a little more leverage. It is simply jammed all the way open and it will release when you apply enough force.

Posted on Apr 30, 2009

  • 313 Answers

SOURCE: dc926 xrp hammer drill

ya its a chuck problem wont hold in reverse

Posted on Aug 12, 2008

rowdy45176
  • 2176 Answers

SOURCE: all i need is the schematic for a dewalt hammer

go to Dewaltservicenet.com and in the middle of the page type in your model number and you can download a breakdown for this tool. If I have answered your request would you please rate this response accordingly.

Posted on Oct 10, 2009

  • 27 Answers

SOURCE: the chuck is stuck on 18 volt dewalt drill

It is not the chuck that is stuck, it is probably the armature. Probably a problem with the brushes. Since it is so easy I would try first unscrewing the caps and pulling the brushes out to see if things spin then. If the brush will not come out then it is probably jambed and you would have to take the drill apart. If you take the brushes out and still have a problem, at least one reasonable but simply checked problem is eliminated.

Posted on Nov 03, 2009

  • 474 Answers

SOURCE: i have a 18 volt xrp dewalt battery that it das

replace bat.try northerntool.com. i bought a couple of after market ones for mine and so far so good

Posted on Nov 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dc 759 it has a plastic cover over the keyless chuck ....it is stripped out.....can i just replace the plastic cover? .... if so how and where can i get one


If the drill is not too old, I would take it to your nearest factory dewalt repair shop. they have a good warranty on their items. If it is older you probably need to replace the chuck itself. You need to remove the plastic to get the chuck open and then there is a screw down inside the chuck that needs removed. The chuck should come right off and just reverse the process to install the new one.

Nov 12, 2010 | Dewalt DC988kar XRP 3 - speed 1/2" 18v...

1 Answer

How do i remove a dewalt chuck in the DC 988 drill ?


go to the tip section and I left detailed instructions on how to do this, or try and go to my profile page under tups. Let me know if you still need more help

Oct 23, 2010 | Dewalt DC988ka 18 - volt XRP 1/2''...

1 Answer

Remove the chuck from the drill too install new one


go to the tip section and there are detailed instructions on how to do this or under my profile they are there also.

Aug 22, 2010 | Dewalt DC988ka 18 - volt XRP 1/2''...

1 Answer

How do you remove the chuck from a dewalt 925 XRP hammer drill


Open the chuck fully and look down the centre and you will see a philips head for a screw the thread on this is opposite so instead of undoing to the left, undo to the right. There is will be a spot of threadlock on the screw so may be a tad tough the first turn, Once removed unscrew the chuck from the spindle of the drill, you may need a good pair of grips or a vice for this as some get very well stuck on! I hope this helps

Oct 08, 2009 | Dewalt Heavy Duty Xrp 1/2" 18V Cordless...

1 Answer

Cordless Drill, Keyless Chuck stuck in full open position.


if chuck is wide open ,look down inside there should be an allen screw or bolt at the bottom of the chuck it should undo anti clocwise and the chuck comes off

Aug 18, 2009 | Dewalt DW056 18 Volt Cordless Impact...

1 Answer

Dewalt 18V XRP Hammer drill, stops on torque in drillpositio


The brushes might need to be replaced. You can find them on Ebay and are easily to replace.

Aug 01, 2009 | Dewalt DC927KL Heavy Duty 18 Volt Cordless...

1 Answer

How to onlock the keyless chuck of my cordless dc988ka drill it was lock to open position


if the chuck is rusted start with some WD-40 on the chuck body. Then what I would do is take a rag and wrap around the chuck collar and using a pair of channel locks grip the collar with enough pressure to hold but not break it and using the tool in the low position pull the trigger switch SLOWLY and see if that doesn't free up the chuck. Let me know if still stuck and I will come up with something else, but this usually works for me.

Jun 10, 2009 | Dewalt DC988ka 18 - volt XRP 1/2''...

1 Answer

Dewalt xrp 18 volt hammerdrill. Need gear schematics.


Go to Dewaltservicenet.com and in the middle of the page towards the bottom type in your model number and it will take you to a page where the schematics are.

May 24, 2009 | Dewalt DC927KL Heavy Duty 18 Volt Cordless...

1 Answer

Dewalt 18 volt cordless drill the chuck is stuck in the fully open position and wont close


Use a pipe wrench on it to give yourself a little more leverage. It is simply jammed all the way open and it will release when you apply enough force.

Apr 30, 2009 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

Not finding what you are looking for?
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jim Thurston

Level 3 Expert

670 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...