Question about Jenn-Air JED8230 Electric Cooktop

2 Answers

Jenn-Air electric stove top - burners/fan won't come on

I have an electric stove top by Jenn Air... The burner indicator lights come on but the burners will not heat up and the down draft fan will not come on...is there a reset button?  The main breaker is fine.  I did see a spark and hear a pop on one of the burners the night before.
I couldn't find the model number for the cook top. But there were only two listed so I clicked on the first one.  It is an older model.

Posted by on

  • 2 more comments 
  • Anonymous Jun 06, 2008

    A similar problem oven fan works etc but no heat on suface or oven, both legs are live

  • Anonymous Nov 22, 2008

    each burner popped and that was it. I don't think circuits in the house are to blame

  • pruddellc21 Dec 20, 2008

    My jennair flattop cook stove has a right front burner with a dual element.(stove 9 years old approx. is in home we just bought) This burner just stopped working yesterday and the strange thing is the light around the knob is on. I was told by jennair they don't answer service questions. I think maybe the light indicates a bad element, any thoughts?

  • Anonymous Mar 27, 2014

    My stove top tripped the breaker, and will not work now. We replaced the breaker, and have power to the elements, but won't work. Is there a reset somewhere on this unit?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. Went to an appliance store that carries Jenn Air. Replaced both plug in units. Now they work perfectly and it cost less than $350 total! Good Luck!

Posted on Dec 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

You may have lost a leg of your 240V service. make sure you have 240 to the appliance and then start chasing down where you lost it. there is no onboard trip or reset on this unit

Posted on Apr 23, 2008

1 Suggested Answer

  • 222 Answers

SOURCE: why does my jenn gas cook top burners all flicker when turned off

hi im gerbee,i will sujest to clean the area were is the place of ur knob control try to remove the control knob then clean it by using a vaccium coz sometimes the problem is very dirt of the control knob.

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are lights not working under the ceramic JennAir stove top?


You have probably accidentally disconnected some wiring whilst moving it need to re explore

Apr 27, 2014 | Jenn-Air JED8430 Electric Cooktop

1 Answer

Why burner on light on stove wont come off


After stove is turned off, the light stays on if burner still warm. If the burner never came on, then it needs to be replaced with new one.

Apr 26, 2014 | Jenn-Air 30 in. CCE3401 Electric Cooktop

1 Answer

Starter clicks but doesn't light burner


either the gas valve for that particular burner isnt opening,or if all burners are like this then the dual valve that feeds the broiler and stovetop has a bad stove top side of valve portion its underneath the oven cavity behind the lower pan drawer

Jul 31, 2010 | Jenn-Air 30 in. CCG2423 Gas Cooktop

1 Answer

Burner light stays on


Hi,

This is caused by a faulty sensor that is located between the burner element and the top. To replace the faulty part you will need to uninstall the cooktop and remove the glass top. The sensor is a rod a little smaller than a pencil that you will see right on top of that burner.

If you choose not to replace the sensor it will not cause any issues other than you will have to live with that light constantly on and you will know when the top is hot for that element.

Jun 19, 2010 | Jenn-Air 30 in. CCE3401 Electric Cooktop

1 Answer

Constant heat not produced on Jenn Air Schott Ceran stove top


It's a piece of ****, replace it the first chance you get.

Dec 26, 2009 | Jenn-Air JED8230 Electric Cooktop

3 Answers

Spot on Jenn Air smooth cook top stove with down draft.


Use Cooktop Cleaner with a soft micro cloth. Don't use water. Buff until the mark disappears. Hint: Never clean the cooktop until it is completely cool to touch as doing so makes cleaning much harder. Never use abrasives on the glass or abrasive cast iron skillets.

Mar 26, 2009 | Jenn-Air JED8430 Electric Cooktop

1 Answer

My electric stove top burner only works on high


This is for the glass top units. well i'm not sure if your problem is with your large or small single burner or the large expandable burner. If it's the large or small single burner replace the burner and if it the expandable also replace the burner. If you have a coil burner replace the infinite switch. Good luck hope this helps you.

Jan 09, 2009 | Jenn-Air JED8430 Electric Cooktop

1 Answer

Three of my Jenn Air burners (electric) only work on High - OLD


Hello
Welcome to Fixya
My name is Huum,

you can find the schematics, diagrams and parts here at this site . just enter the complete model number that is written on the stove sticker and access the info
http://www.searspartsdirect.com/partsdirect/index.action?sid=PSHx20080204x00001a




Please remember to leave a rating before you leave

Dec 08, 2008 | Jenn-Air JED8430 Electric Cooktop

Not finding what you are looking for?
Jenn-Air JED8230 Electric Cooktop Logo

913 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

meztang
meztang

Level 2 Expert

112 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...