My Primera Disk Publisher ii isnt printing the label and not recoding the cd also.

Are you using the program that accompanies the labels. Or by the same company?
I suppose your labels come 3 to a sheet, and you're only printing 1. Have you tried printing 3 at a time?

First of all, use the link below to upgrade your burners firmware, if you have not already:

http://www.primera.com/firmware_upgrade.html

Then check this page for your solution. There is way too much to print here:

http://server.iad.liveperson.net/hc/s-77406906/cmd/kbresource/kb-8512302091572845179/view_question!PAGETYPE?sq=red%2bprint&sp=36&sf=101113&sg=0&st=869502&documentid=402242&action=view

Are you removing the seal (looks like tape) from the new cartridge before installing? It needs to be pulled off in order for electrical contacts to touch. Otherwise, may need to replace printer.

Does the printer head have a cleaning feature in the software? If it does I would try that to see if it improves your printing.

Publisher allows you to create labels on A4 paper of whatever size you need; it also includes a large collection of templates for more common label companies.

I had the same problem. The solution I came up with was to use Microsoft Publisher to print the labels. First I drew a circle about the size of the cd and another inside it for the centre. I printed it out on a plain sheet of A4 paper and measured held it over the label to see how they matched up. I dragged the circles in publisher using trial and error until the circles came out in the same place as the circles of the labels. Then I designed the label inside the circle using publisher and when I printed it on the label it came out in the circle.

If you don't have publisher just check the paper shown in your print dialog and make sure you have changed it to the label type you're using rather than A4 Plain which is the standard.

start all over again for better burning cd and printing of labels.

The Publisher has a cartridge problem. Check to make certain that the cartridges are installed correctly and that the bar code labels on the underside of the cartridge are not damaged.

I think you need to check it with warranty if it comes with it. Because if it has sometime left with warranty try using that. I do believe that if its problem with parts than its different issue. Check if there is an error showed in the PC when you give orint command does it show any dialogue box with error and what is it? Try uninstalling and using its software remedies which comes with the CD.

Go into your printer driver; ie. control panel -> printers and right click the CD/DVD printer. Press "Printing Preferences" near the bottom of the Properties window. Click on "Clean/Change cartrdiges & check Ink" and select properties.