Question about Sylvania LC320SS9 32 in. LCD TV

1 Answer

Power light just blink on my sylvania lc320ss9a lcd

Power light just blink fast on my sylvania lc320ss9a lcd

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

It can be the power supply is unstable due to bad DC filter caps, or it is sensing short circuits caused by backlight board, you will have to take it apart and start by visual inspection first, look for bad caps iwth leaking/bulging tops (caps can look OK but can have high ESR). Then you need to do voltages checking.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Posted on Jul 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green light flashes back red


These blinks [flashes] are fault indication (Error Codes).From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it.This will make repair easy.These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times.Count it carefully.If you wish to get some details, check the site linked here.It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.Surf the site with patience.

Sep 22, 2014 | Sylvania LC420SS8 LCD TV

1 Answer

Universal remote for sylvania model lc320ss9a


Universal remote codes to check with Sanyo brand TVs are: 0020 0054 0186 0028 0030 0171 0381. Check this link. There are details about codes and setup instructions to different remote controls. Check which remote control have setup codes with your TV, and buy that one.

Jan 16, 2013 | Sylvania Televison & Video

1 Answer

The power light blinks fast and no tv comes on


hi! take your model # and google tv problems and you should find lots of
sites with solutions. most of the time with flat panels its the low quality
parts like capacitors that go.you can fix it if you have the skill. good luck!!

Oct 03, 2012 | Sylvania LC225SC9 TV

1 Answer

42" sylvania 6842thg plasma displays digital television and then shuts off after about 1 minute.


Evening It is not energy saving that is bothering you,is it? Try SET-UP and see if you can change it there. Good luck Kolbrun

Aug 24, 2012 | Sylvania 6842THG 42 in. Plasma HDTV

1 Answer

The tv powers up for about 30 seconds and then the power light starts blinking fast and the tv shuts off i think it is the main board but any suggestions would help


Good day.

This the procedure that you have to do.

  1. Remove the cover of your TV.
  2. Power on the TV to apply voltage data.
  3. Check the power supply output.5vdc for main board supply,12v for the sounds and 24vdc for back-light inverter.
  4. If any of the 3 supplies are missing or got a voltage drop,there's a problem with your power supply.Check some leak/bulging top capacitor.
  5. If the 3 supplies are OK,the problem is on the main board of your TV.Replace it.

I hope this solution will be helpful.Thank you for using FixYa.Good luck.

Apr 17, 2011 | Sylvania LC420SS8 LCD TV

1 Answer

My 32 in. sylvania power light blinks green & doesn't turn on & goes right to the red standby light. Why


Power board is dead,must replaced parts like capacitors puff up or burst open.Or replaced the whole power board.The websites Shopjimmy.com,Ebay.com have reburbish power board part.

Jan 13, 2010 | Sylvania LC370SL8 37 in. LCD Television

Not finding what you are looking for?
Sylvania LC320SS9 32 in. LCD TV Logo

Related Topics:

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...