Question about Canon PIXMA MX860 OFFICE AIO-2.5IN LCD 19.4X17.1X8.9IN All-In-One InkJet Printer

2 Answers

Error 6C10 and "copy" and "alarm" buttons flash on machine. Don't know how to fix.

Posted by Anonymous on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

  • DaynaY Aug 12, 2010

    I noticed I had to fiddle with it a few times (wiggling the ink cartige base up and down while pulling it from side to side), then print one medium document (needed to be over 4 pages before it stopped erroring out), but we're good to go now! Thanks a bunch!! I sure do LOVE the internet! :0)
    --Dayna

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,218 Answers

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again
http://www.fixya.com/support/t5998845-error_code_6c10_mean
Hope this helps.

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon MP-5200 printer will not turn on display


6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

Oct 15, 2012 | Canon PIXMA iP4600 Color InkJet Photo...

1 Answer

I have a canon MP550 which has thrown up the error 6C10. I have tried the solutions suggested at FixYa, but to no avail. My printer's only 6 months old. Any suggestions? Regards Jan


It is my pleasure to guide you.


I have done some extensive research on your 'error 6C10'.


I have looked at the following:


QUOTE

PIXMA MP500 Printer
Canon Pixma MP500 Service Manual
http://www.printermanualguide.com/canon-printer/canon-pixma-mp500-service-manual.html

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (ON/OFF button), or Alarm LED Lit in Orange)

Cycles of blinking in orange (Alarm LED) and green (ON/OFF button) 16 times

Error [Error code] Valve sensor error [6C00]

Conditions An error occurred in the valve sensor during cleaning.

Solution(Replacement of listed parts, which are likely to be faulty) - Logic board ***'y (QM2-3078)
UNQUOTE


I realize that the '6C00' error is not exactly your but the manual does not have the 6C10. You can download that at the above link.


I also look at the http://www.retrevo.com/support/Canon-MP500-Multifunction-Printers-manual/id/259bh640/t/2/ Canon Pixma MP500 Users Guide Manual. There are several codes but not the 6C10. You can download this above as well.
Good luck and please post back that you are successful, giving thumbs up, or if I can be more helpful.

Jun 12, 2011 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Error 6C10. How can i fix it?? quickly response needed


Hello thanks for using fixya.

Error 6C10 is probably a waste absorber issue
Try the following solution
  • First do printer off
  • Press and hold resume Button & click Power button. By doing this green led should be on
  • While holding the Power button,release the Resume Button
  • Without releasing the Power Button, click Resume button for 2 times and then release both Buttons.
  • Now Click Resume for 4 times then soon click Power button,to confirm the selected action reset counter absorber
  • At the end turn off the printer and turn on again
I hope this solution will helpful 4 u. Best of luck
Please keep thumbs up in do rating
THANKS & Keep using fixya

Jan 01, 2011 | Canon PIXMA MP540 All-In-One InkJet...

1 Answer

What is error code 6500?


This is an error indicating a problem with the Logic Board Assembly. It's probably not worth fixing, with printer prices being fairly low.\

According to the MP800 Service Manual:

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (COPY button), or
Alarm LED Lit in Orange)

Service call errors are indicated by the number of cycles the Alarm LED and COPY button blink, and the corresponding error
code is displayed on the LCD.

*Cycles of blinking in orange (Alarm LED) and green (COPY button) - 20 times

*Other hardware error - Error

*Error Code - [6500]

*Conditions - The PCI bus error is detected by the ASIC.

*Solution (Replacement of listed parts, which are likely to be faulty) - Logic board ***'y

Aug 21, 2010 | Canon MP830 All-In-One Printer

2 Answers

Canon Pixma 680 Error 6C10 and Flashing Copy and Alarm buttons


Hi! Please try this. Unplug the printer from power source and press hold the power button for 10secs. while unplugged. This should reset the printer's system. Plug the printer to power source, turn it on and see how it goes. This should make your printer work normally again. Hope this helps and have a good one!

Jun 15, 2010 | Canon Office Equipment & Supplies

2 Answers

6c10 error on my canon mp630. There does not appear to be any paper debris and I have been turning the rotten thing off and on for weeks now to get it to work


It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

http://www.fixya.com/support/t5998845-error_code_6c10_mean

Hope this helps.

May 19, 2010 | Canon PIXMA iP4600 Color InkJet Photo...

Not finding what you are looking for?
Canon PIXMA MX860 OFFICE AIO-2.5IN LCD 19.4X17.1X8.9IN  All-In-One InkJet Printer Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...