Question about Gateway FPD2275W LCD Monitor

1 Answer

HP OmniBook XE3 display problems

I have an HP OmniBook XE3 that on cold start has dancing horizontall lines on the screen. if you tap the side of the monitir it sometimes stops or you can let it run till it warms up and restart it and they are gone. There are no lines if it is warm. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 180 Answers

It is your logig board that turn defect.

Posted on Apr 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display picture dancing & lining


plz change your desply screen than fault cilear

Jul 22, 2013 | Neovo AG E-17A 17'' LCD Monitor

1 Answer

Lcd diagram


What is the model? What is it connected to? When you start things does it work after the lines and dancing?

Jul 22, 2013 | Neovo Computer Monitors

1 Answer

Display probelem - white rasters


Hi, have you experienced tapping your monitor and display changes? try to re-solder cold solder electronic components in the mother board and neck board.

Jun 21, 2011 | HP S7540 17" CRT Monitor

1 Answer

When i plug in the switch "on" my HP COmpaq LCD 15" monitor can not respond. black screen and the power putton light GREEN show but not display. after 1 minute the green light off. when i soon "on" monitor...


ysm7862001, Monitor has possible problem lighting-up cold cahtode fluorescent lamps that provide lcd panel with white light from rear(reverse side) of the panel. No white light= black or blank n black screen. Read my fixya profile for all options you might have open to you.
12fixlouie

Mar 01, 2010 | HP Compaq 1501 15" LCD Monitor

1 Answer

W2753v screen flicker - refresh


Hi
What causes monitor screen to flicker?
Answer
keep electronics away from your computer. Mobie phones etc. can distort the image shown on the screen for periods of time, usually when a text or call is coming through.

Answer
A nearby device can cause stray magnetic fields that will cause the display to be affected.
A problem inside the monitor will cause the display to have problems.
If somebody turns on their monitor nearby, the monitor's degaussing when it starts up will cause your monitor to dance wildly for a moment or two.

Answer well one major cause can be the weakness of the electron gun that fire electrons on the silicon plate (pixels) that produces image on the screen so there must be some problem in electron gun in my view

Jan 29, 2010 | Computer Monitors

2 Answers

Blank HP w1907


If the power light does not turn color and stay's green on startup, it is not a power problem. It is most likely the inverter. If the unit is in warranty, send it out ASAP. Contact HP customer care by email and have the issue logged in.
If in warranty, they will send you a box by FedX second day and have repaired.
This is a 19" monitor and will not be worth paying for repairs if not in warranty.

Sep 03, 2009 | HP w1907 LCD Monitor

1 Answer

Vertical red line on HP w2207 monitor


Please try to connect the monitor to another PC, if problem still exist then probably there's an internal problem in the circuit board of your monitor wherein an elecronic part/s might be cold soldered / defective. I recommend to bring the monitor to an authorized HP service center to fix the problem. If the monitor display is good if connected to other PC, then your previous PC should be checked if the VGA card (if there is any) is properly placed to its slot & working properly as well as it cables & connections. regards

May 29, 2009 | HP w2207 Monitor

3 Answers

Syncmaster 245B Monitor Shivering horizontal lines


Which type of video connector are you using? VGA or DVI?

If you are using VGA, the horizontal line could be due to interference, like from an electric motor (fan) near the video cable.

Other thing to try is to change the refresh rate. In Windows XP: Control panel --> Display Properties --> Settings tab --> Advanced button --> Monitor tab --> Screen refresh rate. The default ot 60Hz for LCD monitors. Bump it up to 75Hz. That could give a clue to the problem or maybe even fix it.

Jan 08, 2008 | Samsung SyncMaster 245BW Monitor

3 Answers

Monitor going black


My HP f1703 is almost 3 years old and started having this same problem. My fix got the display to stay on. Don't know how long this fix will work. I set the monitor brightness to 51 and contrast to 41. You may have to adjust to your levels to your appropriate enviroment. Levels may determine how long the monitor stay operational. Do NOT set your monitor brightness to factory levels it will just start to recreate the problem again. Solution: The monitor should be on with the blue button lighted. If the screen is acting up (you turn it on and the display lights up and then it turns off within 2 to 5 seconds) Try decreasing the brightness level down as much as possible. Wait 15 to 30 seconds and see if the display comes back to life. If not, turn the monitor off and on again and try the procedure again, if necessary. Cause: I believe the monitor brightness level, set at 100 by the factory setting, is over driving the display and causing the protection circuit to cut off the flouresent lamps that light the display. HP had an issue with this display, and had a notice to replace them if the problem occurred during the warranty period. They extended the warranty period from Jun 04 to Feb 06. Check with HP Technical Support to determine if your monitor is cover.

Oct 10, 2006 | HP Pavilion F1703 17" LCD Monitor

1 Answer

Green screen


From your lines... 'Tapping the side of the monitor' Reminds me cracked solder joints. You need to check for this.
First open the Chassis and narrow down the area of the circuit board where exactly applying force makes the monitor fine and in that area of board / around that area look for cracked solders. Definitely this will help you.

May 30, 2006 | HP Pavilion M70 17" CRT Monitor

Not finding what you are looking for?
Gateway FPD2275W LCD Monitor Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computer Monitors Experts

olayoju victor

Level 2 Expert

191 Answers

NIK
NIK

Level 2 Expert

206 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Are you a Gateway Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...