Question about Fisher and Paykel Washing Machines

1 Answer

MY FISHER & PAYKEL WASHER STOPPED AFTER RINSE WHEN I WASHED BATH RUGS THAT FELL APART. IT WON'T DRAIN AND MAKES A WHINING NOISE WEN ADVANCED TO SPIN CYCLE. WHAT SHOULD I DO?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

Your pump is blocked with the bits from your wash. A handyman may be able to service the pump, but it would be a quick job for a tech. The pump us accessed from under the machine and can be inclipped like a light bulb. Inspect carefully first. look for small latch clip before twisting. Make sure the machine has been bailed out first. lean the machine back againt the wall to give access and to keep what little water remains, away from the drain/pump hole. Good luck....Nomess

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine stuck in drain mode, beeps, can only turn off at powerpoint.


Your motor controller board is faulty
needs repair or new/recondition board.

May 06, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher & Paykel Aquasmart washing machine makes loud banging noise then stops during rinse/spin cycles


Your Aquasmart machine requires 4 new suspension damper rods & 4 top bands, these are a common problem for AquaSmart machines.

Feb 02, 2013 | Fisher and Paykel Washing Machines

1 Answer

Kenmore 90 plus series washer won't spin, barely agitates, will drain - but makes loud noise


It sounds like the transmission is done. Can't pinpoint what it is exactly, but I would start there.

Aug 21, 2012 | Kenmore Washing Machines

1 Answer

We washed a throw rug and it oversuds. Removed the rugs and suds. Now the washer won't rinse or spin.


Hi - Im unsure what would have caused this problem - try this though as I think the pump may actually be glogged.

Advance the machine to spin and see if the pump would operate? - if it doesn't the you need to sccoop the water out and clear out the pump..

I will come back to check if you have sorted this out a little later..

Jun 30, 2011 | Fisher Paykel EcoSmart GWL15

2 Answers

F&P washer lights on and beeps


Clogged pump stopped up drain. If the washer does not think all water was pumped out in 8 minutes then it shuts down. Slow drain is my first inclination.

Dec 31, 2009 | Fisher Paykel EcoSmart GWL15

1 Answer

Stops before rinse cycle... won't drain or spin.


The REGULAR CYCLE button turns the drain pump on or off. The REGULAR LED will turn
on when the pump is on. This feature can be used to drain the tub. You could get a bucket and lay the hose on the fllor. Gravity will drain it down.

Sep 07, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

F & P Smartdrive Excellence works fine until it reaches the rinse and then just makes whirring noise. I can't get it to spin either and it won't empty. Is there a way of at least draining it. Cheers...


Hi Kiri,

F&P mahcines are a little hard to drain as the drain hose comes out of the rear of the cabinet half way up.

You may have to use a small container and manually bucket it out.

The drain pump is more than likely blocked (seen this a lot on the F&P) and is accessable from the front panel or underneath the machine.

Repost if you need anymoe help!

Jun 17, 2009 | Fisher and Paykel Fisher & Paykel Washer

2 Answers

Fisher Paykel gwl11 washer leaking and squealing


Set the machine on its side and started taking it apart til the problem was obvious. Called Fisher for the parts. A big black seal is out and a bearing above the impellor that cools the motor, we ordered a pump assembly that is on the bottom side of the motor. I am still going to replace the water pump in the drain side, that is a no brainer. Will update on the repair when the parts arrive

Jun 01, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher Paykel GWL11 Top Loader Washer


Please dont put any more money into this machine,if you wait long enough it will take alot more than a penny. 

May 11, 2008 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...