Question about DVD & Blu-Ray Players
I had this same problem with my Apex AD-500W DVD Player. I decided since everyone said the player basically needed to be replaced it wouldn't hurt to go through the buttons on the remote just to try and figure it out......I DID!!!! I turned on my DVD Player, inserted a disc, turned on my tv and then hit the SYSTEM Button right below the power button until the screen said MULTI and the machine started working perfectly. There are 3 settings in that button, PAL which made my screen go crazy, NTSC ( i have no clue) and MULTI(this one made it work)! Hope it also works for all of you!!!
Posted on May 16, 2008
Either a disk problem, or a player problem. If you get the "no disk" message when using other disks(try originals if you were trying burnt), that aren't scratched, then it's possible that the lens needs cleaning. open the player, locate the lens, and gently brush off any accumulated dust. If you see none, then it will take a more serious repair, possibly to the motor assembly, or the lens mechanism. Good luck
Posted on May 04, 2006
you have dirty lens, try to cleaning with 100% cotton buds. or you have damage laser eye, or broken flex ribbon wire, but first you have to do is to cleaning the lens with cotton buds.. if not reading after you clean the lens! change the laser eye and flex ribbon wire.
Posted on Sep 09, 2007
Tips for a great answer:
May 12, 2012 | GE DVD & Blu-Ray Players
Mar 19, 2011 | DVD & Blu-Ray Players
May 23, 2010 | RCA DRC233N DVD Player
Aug 05, 2009 | Amphion Mediaworks M-520 Portable DVD...
May 18, 2009 | Durabrand 8.5'' Portable DVD Player
Apr 28, 2009 | RCA DRC8300N DVD Recorder/VCR
Jan 27, 2009 | Audiovox D1817 Portable DVD Player
Nov 17, 2008 | Durabrand DUR7 Portable DVD Player
Aug 31, 2007 | Daewoo DVDS151 DVD Player
95 people viewed this question
Usually answered in minutes!