Question about Patton (HASF1016UC) Stand (Pedestal) Fan

Open Question

Patten Fan model P-2486 Patten motor model 1010MP Style SFE-74SP Fan squeals on high.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
PegBox60965
  • 51 Answers

SOURCE: Looking to replace Patton fan motor, model 1010mp, style TJ74SP

If you are up to disassembling your motor, you will find a thermal cutout near the windings which frequently fails open. Replacements are readily available, or just jumper it out. If the bearings are shot or the windings burned you're out of luck. Trust me, a new motor will cost more than a whole new fan.

Posted on Jan 01, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turned my heat on yesterday morning and fan was running on high and couldnt turn fan speed down , went to turn the heat off and fan still was running on high, i had to pull the fuse to get the fan to...


I would take a SWAG that the blower motor resistor is shorted to power, causing the issue.

2004 New Body Style ( non Heritage or Lightning models ) - Red arrow pointing to it.
Need to squeeze the top of the glove box together, to let the stops come past the opening, and let it drop straight down.
sscullys_209.jpg

Picture of 2004 Heritage / Lightning model ( 00-03 MY body style )
Taken from passenger side floor, up behind dash / glove box.
sscullys_210.jpg
This is the resistor and the pigtail down above
sscullys_211.jpg

Sep 19, 2011 | 2004 Ford F150

1 Answer

NEED REPLACEMENT MOTOR FOR PATTON 1010MP-HY FAN. WHERE CAN I PURCHASE THE MOTOR?


CTG ' Order 1010MP from PATTON ELECTRIC CO INC Now from CTG !

It looks like you can purchase a motor here.
Make sure you have the correct data from your motor.
There is also a contact button so you can probably call, too.

Good Luck,
Your FixYa Texpert,
Gary

Aug 17, 2011 | Patton U2-1487 Floor / Box Fan

1 Answer

I have a Patton model 1010MP-1 Pedestal fan. The motor model number is 30ACP. The switch has three wires running to it (Red, Grey and Black). The switch itself is a Zing Air and has a L, 1 and 2 on the...


I was looking for this but figured it out myself. The guy wire is hot, the red goes to the low coil and the black goes to the high. So, if you wire the gray and black together, you get high as soon as you plug the fan in.

Aug 10, 2011 | Dryers

1 Answer

NEED VALUE OF CAPACITOR ON MODEL 1010MP FAN. CAN'T FIND ANY INFO ON THE PART.


You can use any capacitor of value about 3.3mF to about 6.8mF with an AC voltage rating of about 230 to 250 volts.
These are the bipolar type capacitors and is generrally available at all electrical or electronic spare parts shops.
Hope this helps.

Aug 29, 2010 | Patton (HASF1016UC) Stand (Pedestal) Fan

1 Answer

Inside rear fan motor make high pitch noise.


You have a beginning of a possible problem with your fan or something causing the fan to squeal. If the fan motor goes bad you will have a lot of lost food and possible damage to your refrigerator. So please send me you model number, keep and eye on it and we can watch what is taking place. Thanks, Sea Breeze

Jan 06, 2010 | Samsung Refrigerators

1 Answer

Need interior diagram of Sunbeam MixMaster Model 2486


Here's the solution. The spring controls the beater eject button. The spring is mounted on the metal shaft and is oriented so that the straight side of the spring rests along the white plastic part adjacent to the shaft, and the curved side of the spring points outward and downward so that it will rest against the case when the unit is reassembled. See photo.
b8f15644-ddab-48c7-945e-bcbc448c0d0e.jpg

Dec 26, 2009 | Sunbeam Food Mixers

1 Answer

Looking to replace Patton fan motor, model 1010mp, style TJ74SP


If you are up to disassembling your motor, you will find a thermal cutout near the windings which frequently fails open. Replacements are readily available, or just jumper it out. If the bearings are shot or the windings burned you're out of luck. Trust me, a new motor will cost more than a whole new fan.

Jan 01, 2009 | Patton (HASF1016UC) Stand (Pedestal) Fan

8 Answers

Patton fan motor


I found something on amazon, take a look here: Emerson Fans Moving Air In Style . I hope I have helped. Cheers

Sep 17, 2007 | Rival U2-1403 Fan

Not finding what you are looking for?
Patton (HASF1016UC) Stand (Pedestal) Fan Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Patton Dryers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

15936 Answers

Tom Chichester

Level 3 Expert

35482 Answers

Are you a Patton Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...