Question about Amana 24 in. ADB1500AW Built-in Dishwasher

2 Answers

Stopped in the middle of the cycle and won't restart. Button panel has no lights on and no response to touch.

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,557 Answers

For the washer to stop so abruptly with no lights no indication at all i would say you have blown a major power supply part in your p.c.b (board ) the fuse may have simply given out for no reason but in most cases with these boards there is a good reason for the fuse to blow with most parts within the board being nano (small parts) most techs replace the whole board in this case you can order them from the manufacturer and with a little logic fit them your self


good luck

Posted on Jul 13, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

Firsst thing to check is that you are getting power to the machine check your breakers on your electical box if you are not electrically handy call a technician you also would also need to check the power conection that goes to the bottom right corner of the machine and lastly if you do have power going into the machine you would need to check the control board. hope this helps

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my washer stop working in the middle of wash cycle and then go dead and no response?


Should get some one to look at it. If there is a hot smell could be a short someplace.

Dec 22, 2016 | Kenmore Washing Machines

1 Answer

Electric dryer stopped in the middle of a cycle of towels (or after they were dry...not sure, as renters reported problem). . There appears to be no current..panel does not light at all Have reset the...


My 4 yr. old Maytag electric dryer stopped in the middle of drying towels and wouldn't restart. I called one repairman who told me it was my motor and I called another repairman closer to where I live and he came out and replaced my fuse. My dryer works fine now.

Aug 17, 2011 | Kenmore 63942 Dryer

1 Answer

No lights on, didnt complete the drain cycle, stopped working now


There is a thermal fuse located in the control panel inside the door. It could be blown, but if so what caused it. they come with a retrofit pigtail to prevent loose connectins on the fuse. You may have a short somewhere in the dryer, and just blow the fuse again. Could be bad motor,fill valve, or heater, or even the control board. I'd try one fuse first.

Jul 26, 2010 | KitchenAid 24 in. KUDP01IL - Multiple...

1 Answer

It's STUCK


Hi


The light is flashing due to the door lock error. The door lock is activated as the machine experienced an error or was stopped in middle of a cycle. Or the door was being pulled while the machine was running a cycle. Try unplugging your washer and restart the washer to check if you are still getting the same blinking light. If error is still not resolved then start the rinse/spin cycle & stop the cycle, now press and hold the cancel button for 5-10 seconds. However, if you are still not able to get the door open then you'll need to open the door manually by disassembling the washer. Please post back for any further assistance.

Daniel

Jul 25, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Touch screen suddenly stopped responding!


Make sure your device is not locked. Lock button is the "Slide Switch" lower left side of device. If locked, will show a lock in upper right part of screen. Will unlock when you pull down the keyboard. This is also a very good feature to prevent accidentally dialing when getting in/out of your car etc...To unlock, slide switch to middle position.

Sep 04, 2007 | Samsung SCH-i730 Pocket PC

Not finding what you are looking for?
Amana 24 in. ADB1500AW Built-in Dishwasher Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Dishwashers Experts

Cleverer2

Level 2 Expert

298 Answers

Mike

Level 3 Expert

4336 Answers

Kolbrun...

Level 3 Expert

1205 Answers

Are you an Amana Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...