Question about Fisher and Paykel GWL11 Top Load Washer

3 Answers

What does fault code 51 mean? - Fisher and Paykel GWL11 Top Load Washer

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,940 Answers

Error code 51 usually means a faulty diverter valve. Try and run a wash cycle, and observe the drain hose. If water comes out, the diverter valve should be fine, if no water comes out you should take your diverter valve out and check for debris, or continue to read through the following possibilities of why your washing machine is acting up, and the actions to take.

1. Diverter valve
Action - Check diverter valve continuity. If open circuit, replace diverter valve.

2. Motor Controller Board (drive circuitry blown).
Action - Replace Motor Controller Board
3. Diverter valve harness/connectors.
Action - Replace wiring harness

Posted on Jul 13, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do i need to leave my code diverted sim in a mobile phone for the divert to still work?

Posted on Dec 19, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

Hope this helps
That is error code 51, usually a faulty diverter valve or debris stuck therein: Let us read from the sacred parchment:
51. (00110011) Diverter valve timeout fault
The machine has detected that the diverter valve is leaking water to the drain when it should be recirculating.
Check by waiting for re-circulating function and observing if water is coming from the drain hose.
Primary source - Diverter valve
Action - Check diverter valve continuity. If open circuit, replace diverter valve.
Secondary source - Motor Controller Module (drive circuitry blown).
Action - Replace Motor Controller Module
Tertiary source - Diverter valve harness/connectors.
Action - Replace bowl harness

Posted on Jul 13, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Fisher&Paykel Intuitive eco IWL 16 Auto washer Fault code 51

Our washer did the same but it was after I took the excess drain hose and pushed it into the drain in the wall. I thought it looked "more tidy" In doing so I created a siphon effect. Once I pulled the excess hose back out it was fine.

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair if engine cannot race up when vehicle is running in Toyota Model KDN190R-CRPSYT vehicle?


If it is a Tercel or MR2, it is T and E1 terminals. Code 21 is main oxygen sensor signal fault. Code 51 is A/C signal on; DL contact off (in transmission shifter with diagnostic connector jumped). I have no idea what that 51 means.

May 28, 2015 | Toyota Cars & Trucks

1 Answer

What is Technical Fault 51?


The most common reason for this code is :-

F51 error is caused by a faulty or blocked heater pressure switch. It is not a job for an unqualified person.

"The program is interrupted and the drain pump is operated. The display shows Technical fault F51. Call Service Department. The buzzer is activated for 2 minutes. "

Apr 14, 2015 | Washing Machines

1 Answer

What repairs should be made for diagnostic codes 13 and 51 .


which engine, that be first. no? look at it and what is it?
ill pretend 4.0L I-6
old car, with OBD1. code 13 and 51 are fully covered in the FSM.
ever seen and fsm? login to aldata.com and read.
and is discussed , infinitely on all jeep forums on the net. endless.
google that.? yet?
here ill google for you
i google jeep 13
http://www.allpar.com/fix/codes/faults/code13.html

and jeep dtc 51
http://www.allpar.com/fix/codes/faults/code-51-52.html


13 would cause 51s so,...... work that.

Oct 02, 2014 | 1994 Jeep Grand Cherokee

1 Answer

FLASHING AIRBAG. Code 51 What's this ?


Fault Code 51 - Diagnostic Monitor Internal Thermal Fuse - Open Due to Intermittent Short To Ground

This means that an intermittent short to ground exists in the air bag system. The diagnostic monitor will eventually have to be replaced but only after a visual inspection leads to the repair of a short to ground in the wiring harness.

The following service tips may help you to find intermittent shorts to ground:
Inspect wiring and harness in the areas where they pass through or are located next to metal components (i.e. engine compartment bulkhead, body sheet metal, component mounting brackets, etc.).

Jan 06, 2011 | 1992 Mercury Grand Marquis

1 Answer

What does the error code 51 mean on a 2007 Yamaha r1


Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/226831-yamaha-r1-04-05-06-error-code-51-hi.html
Yamaha Fault Codes motorcycle manuals
Yamaha R1 YZFR1 2007 2008 Service Repair Manual Download Download Manuals...
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Nov 04, 2010 | 2007 Yamaha YZF-R1

1 Answer

Error code 51? F & F intuitive washer


Hi just read your posting.Error code 51 means you have a Recirculation Fault.This means while the machine is filling or washing it loses water.Error code 37 means you have Pump Block error which means the machine is not draining.Please look under the machine to the front right and you should see a pump with a red or black fan attached.Can you confirm this please? I think there is a problem with your diverter valve and the information on your type of pump will help me rectify this problem for you.Please reply with additional information on the type of pump in your machine.Looking forward to your reply.

Jul 01, 2010 | Fisher and Paykel Washing Machines

1 Answer

How many #s long is the fault code on 1993 dodge caravan. it gave me theses #s (12 41 51 33 34 11 755) and u help?


there is no 755. 12 means no tac signal [of course because engine is not running] 55 means end of code list. only two digits long on all of them

Apr 27, 2010 | 1993 Dodge Caravan

1 Answer

Airbag dash light flashing code 51


Common fault on FORD

Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.

Just push it together properly and it should clear the AirBag fault

May 18, 2009 | 2003 Ford Focus

1 Answer

Fisher&Paykel Intuitive eco IWL 16 Auto washer Fault code 51


Our washer did the same but it was after I took the excess drain hose and pushed it into the drain in the wall. I thought it looked "more tidy" In doing so I created a siphon effect. Once I pulled the excess hose back out it was fine.

Jan 23, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

1,150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...