Question about Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

1 Answer

E6 error codesmeg dishwasher - Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

Another tech wrote this previously hope this helps
e6 error code - noavatar_s.gif p57bub
Rank: Apprentice
Rating: 0%, 0 votes
I had this problem and fixed it tonight. When selecting a program water pumps into the machine, but with no drain i ended up with too much water and error code E6.

I traced the fault to a broken wire between the electronic module in the door and the pump. The point at which the door opens and closes on the cables had frayed the insulation and broken through the wire. As this was the live feed to the pump and a potential short from 240VAC to the chassis its dangerous!!

Repairing the wire break and re-insulating fixed the problem

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E6 error code on fisher & pykel single door dishwasher


1-Time Flash & E6 error troubleshooting, part 1 of 3 for ...

? 3:04
https://www.youtube.com/watch?v=sYNN1Rvc7r0
Dec 18, 2012 - Uploaded by MitsubishiHVAC
1-Time Flash & E6 error troubleshooting, part 2 of 3 for Mitsubishi Electric Cooling & Heating - Duration: 2 ...

LG Control Panel Overview

www.lg.com > ... > Repair > Locate Repair Provider

LG ElectronicsAn OE error code indicates the washing machine is draining slowly or not at all. This is usually ... When you see the E6 error icon, it means there is a clutch error.



Nov 19, 2015 | Fisher and Paykel Dishwashers

1 Answer

Kettle does not heat. What does the E2 message mean


SMEG DISHWASHER ERROR CODE E2? - How To Mend It

howtomendit.com > Kitchen Appliances, Electric Kettles
Free repair help - smeg dishwasher error code e2. ... Q & As - mend, repair, fix kitchen appliances, electric kettles, kettles, water, not, plug ... Search for - error, e2 ...

Oct 15, 2015 | Oster 1.7 L Variable Temperature Electric...

1 Answer

Error 8 . How do I rectify it?


6. Troubleshooting
In case of a malfunction, the dishwasher will identify the program by switching on a combination of lights.
When an alrm is present, all the PROGRAMS lights (4) come on, while the PROGRAM PHASES lights (7) identify the error code:
E2
The system which limits the water level inside the dishwasher (safety unit) has been tripped.
E3
The appliance is not able to pump out the water.
E4
Temperature sensor disconnected.
E5
The appliance is not able to take in water.
E6
The appliance is not able to pump out the water from the tank.
E7
The appliance is not able to measure the amount of water loaded accurately (on models with turbine flow-regulator only).
E8
Anomaly in the system which distributes water to the basket (where installed).
56
CODE
E9
PHASES LIGHTS
DESCRIPTION
E1
The anti-flooding system (if installed) has been tripped.
The maximum level of water for loading has been exceeded (on models
\
Thjere is something wrong with the distribution. Check for blockages.

Jun 02, 2015 | Smeg 18 in. DWD409SS Built-in Dishwasher

1 Answer

Smeg D1 612 CA dishwasher wont run


You may have to give a little more information.
Have a look at the manual, here -
http://www.manualslib.com/manual/343502/Smeg-Di612ca.html
and check for error codes/lights etc (p17; faults E1-E9)
Hope this helps

Oct 28, 2013 | Smeg Dishwashers

1 Answer

Smeg dishwasher E1 error code, not filling up


Hi!

here are manuals to the number of SMEG dishwashers.

Hope you could find there your device and the "troubleshooting" part of it would help you!
https://manualsbrain.com/en/brands/smeg/dishwashers

Dec 07, 2017 | Smeg Dishwashers

1 Answer

Dishwasher Smeg DWD409SS


Hi
Please go to www.smeg-service.co.uk/support

Jun 22, 2008 | Smeg 18 in. DWD409SS Built-in Dishwasher

1 Answer

E6


I had this problem and fixed it tonight. When selecting a program water pumps into the machine, but with no drain i ended up with too much water and error code E6.

I traced the fault to a broken wire between the electronic module in the door and the pump. The point at which the door opens and closes on the cables had frayed the insulation and broken through the wire. As this was the live feed to the pump and a potential short from 240VAC to the chassis its dangerous!!

Repairing the wire break and re-insulating fixed the problem.

Lee

Dec 10, 2007 | Smeg DWI614 Built-in Dishwasher

3 Answers

Error message on Smeg dishwasher


i have error 1 on our dishwasher any clues ?

Apr 23, 2007 | Smeg 18 in. DWF410SS Slim-Line...

1 Answer

Will not drain and shows E6 error code


I had this problem and eventually found a small piece of mussel shell in the bottom part of the machine, it seems they are very sensitive to the tiniest fragment of debris.

Sep 24, 2006 | Smeg 24 in. DWF614SS Stainless Steel...

Not finding what you are looking for?
Smeg 24 in. DWD1SSE-1 Built-in Dishwasher Logo

Related Topics:

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1031 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...