Question about Protron PLTV-32 Television

1 Answer

Need code for dish network remote 5.0 ir to control protron tv pltv-32

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

If this has not been resolved, I have some information that will help you out. I have enclosed two links, one of which you will find the directions to a power scan, which scans the tv for the correct code for the remote. The other link is for the codes for each particular brand. If you choose to go with the codes, then you will need to follow these simple steps:
1. Hold down the clear TV button until all lights light up at top of the remote.
2. Punch in the 3 digit code
3. Press the pound (#) button below the number 9 on the numeric keypad
4. Try the volume and to turn the tv on/off. If one or both of these functions do not work, you will want to start over at step 1 with a different code until you are able to turn the tv off/on and work the volume.

Power scan
http://www.dishnetwork.com/SupportSection/power-scan-instructions

Codes
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml


Becki Barned
DISH Network Customer Service

Posted on Jan 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We were just given a pl26 tv, by can not find where to plug the cable connector into the tv, help


this information may help
32" Protron PLTV-32 720p Widescreen LCD HD-Ready TV - 16:9 ...32" Protron PLTV-32 720p Widescreen LCD HD-Ready TV - 16:9 800:1 6ms ... Front Panel Controls: IR sensor ; LED; Top Panel ... Model: PLTV-32; Product Requirements: HDTV receiver

May 05, 2012 | Protron PLTV-26 26 in. HD-Ready LCD...

1 Answer

I cant seem to find the code for my proton tv im trying to connect it with my dish network remote to it but i cant find the code can u help me out


Here are some easy steps and codes that should help you out.



1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

589

Becki Barned
DISH Network Customer Service

Feb 07, 2011 | Protron PLTV-32 Television

1 Answer

Hi I recently change the main board of my protron 32"pltv television and my remote control does not work anymore, do I need to change the IR remote receiver


You will need the scope to find out if the IR receiver is putting out the signal to the main board, or take a chance by replacing the IR board. Did the remote work before changing the main board?

Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Aug 12, 2010 | Protron PLTV-32 Television

1 Answer

Dish network 20.0 ir code for 37" protron pltv 3750


I definitely hope that you have gotten the code for your remote. But if not, here are some simple steps to run through!

Here are the steps for a power scan, which will scan the tv for the correct code:
1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

And here are the steps to program using different codes: (codes provided below)
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


codes: 589 That is the only code we have for the tv. So if that doesn't work, try the power scan.


Becki Barned
DISH Network Customer Service

Apr 21, 2010 | DISH Network IR Remote Control

1 Answer

Need the rca remote code for a protron pltv-32


Afraid, you must purchase a new clicker. this is counterfeit brand, with no codes for universal remotes. If you can't get it at manufactures, check all available universal remotes at department stores for supporting this "brand". Sorry, didn't have any good experience of getting parts for "Protron".
Good luck,
Alex's TV Service,
Philadelphia,PA
215-806-5980.

Jan 22, 2010 | Protron PLTV-32 Television

1 Answer

I need a code for my Direct TV remote for a Protron PLTV-32.


Believe it or not, the higher-end remotes have more codes built-in. The RC64R has Proton TV codes 10178, 10003, 10052, 10466. You may try those with your current remote; however, you also may need to upgrade your remote to the RC64R or RC64RB.

Apr 11, 2009 | Protron PLTV-32 Television

2 Answers

Digital signal


hi my name is mark, if you are already hooked to dish network, there is nothing you have to do. you are ready fotr the dtv change over june 12 09

Aug 17, 2008 | Protron PLTV-32 Television

3 Answers

Protron pltv 32 directv remote code


Protron 32", new Directv R66 receiver/remote. Code is 10030. Works

Feb 02, 2008 | Protron PLTV-32 Television

1 Answer

Searching for TV remote control code for PLTV-32


I spoke with their tech support in India and was told this tv will not work with a universal remote.

Dec 29, 2007 | Protron PLTV-32 Television

1 Answer

Replacement remote or code


Punch in the code #0003 to program a universal remote...

Dec 17, 2007 | Protron PLTV-32 Television

Not finding what you are looking for?
Protron PLTV-32 Television Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Cindy Wells

Level 3 Expert

5160 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...