Question about Televison & Video

1 Answer

There is no sound on some channels on my hisense tv

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 416 Answers

Locate the SAP or MTS feature by TV remote button or TV Audio Menu. It needs set to STEREO. SAP or Second Audio Production is not used by every broadcaster. In those cases, you will have no SAP audio on the channel. I hope this was helpful, best wishes.

Posted on Jul 13, 2010

  • diannefair Jul 13, 2010

    I found the sap button . It is set to MTS stereo. Nothing has changed. I tried unplugging for a minute. I tried resetting factory settings. still no sound on a few channels

  • snooper1284 Sep 27, 2010

    I am having similar issues. I have sound on some channels, not all. The commercials on the channels without sound have sound. Some of the channels have no voices, but I get the background music. It was working fine one day and the next day, no sound. It appears the sleep mode went out also.....



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I got all analog channels but no digital channels on my 55 inch hisense 3d tv

SORRY but no idea where you live but here in the USA there are no analog channels anymore

Oct 22, 2017 | Hisense Televison & Video

1 Answer

Hisense TV not working properly

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary

Aug 26, 2017 | Hisense Televison & Video

1 Answer

Sound quit on my hisense tv,plug and un-plugged, pressed on every audio tabs on remotes, picture is excelant, channels are excelant,the mute feature is ok,just no sound!

really need help from a professional...there must be some kinda complecation on the inside ,maybe caples are touching and they happen to be open(uncovered)

May 27, 2017 | Hisense Televison & Video

1 Answer

When i connect a usb to my hisense 40 inch led tv i can get picture quality on a bluray movie but i am not getting sound it prompts the audio not supported

You have to Check the audio format of the Movie or video that you downloaded and saveg in that usb drive. It can be multi channel like Dolby digital or DTS. if so Your tv wont decode it. Normally the USB in tv only support stereo (Two channel PCM audio).
If you wish to get some details; check the site linked here. Pull up older posts.

Aug 31, 2016 | Hisense Televison & Video

1 Answer

How to connect sound system to Hisense LCD tv

I phoned the help line at Hisense, they stepped through the set-up - its all good now

Dec 30, 2009 | Hisense TL3000 30 in. HD-Ready LCD...

1 Answer

Sound does not work on several channels on Hisense LCD1504


Jan 19, 2009 | Hisense LCD1504 15 in. Television

1 Answer

Hisense 42inch lcd tv

It sounds like it's the inverter panel which lites the lcd back light.
If it's under warranty, try to replace it, or take it in for svc.

Dec 23, 2007 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

Loss of sound

you can try changing the assigned should have to put the second T V on a certain channel like channel 72 or 68 or something like that.on the main reveiver you should go into the menu and poke around in the setting until you see a REMOTE ADDRESS option walk through the steps and change the channel that the second TV receives its picture on, you should shoot for channel 62-72.also make sure the hisense is set to a cable can go into the menu on the hisense and go to your settings and change this .it will be on CABLE or ANTENNA.try switching those around.also did you have sound before coming out of the coax output on the hisense? if your not sure then plug a vcr into and make sure the TV is working with different equipment.GOOD LUCK!

Nov 08, 2007 | RCA DISH Network(r) 311 Satellite System

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

549 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

82322 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides