Question about ViewSonic N2750w 27 in. HD-Ready LCD Television

1 Answer

RC00070P remote has stopped working

Tv can be turned on/off manually on the TV - but changing the batteries hasn't made the remote work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

You can get remote directly from Viewsonic, they are about $25 + shipping.

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Coby remote rc-057


could be many things, make sure nothing is around the tv that would block the receiving eye for the remote on the tv. sometimes the receiver in the set can go bad.

Jun 17, 2014 | Coby TFTV1923 19 in. LCD TV

1 Answer

Samsung LE32C450E1W TV remote control stopped working, changed batteries no luck, turned off at power source for 30 min which fixed prob temp but has happened again and now turn off doesn't help....


Check the remote control for its infrared emission. Check it with fresh batteries. Clean the battery contacts inside its battery compartment. If these do not help you, you remote control need cleaning. If you wish to know more about how to clean and repair a remote control check this site. Pull up older posts. One among it has details.

Mar 24, 2013 | Samsung TV Remote Control

1 Answer

The remote control does not power the TV on and off. Plus I have comcast cable and I can't get the comcast cable remote to turn on the TV. The TV was purchased from HSN 42" lc hdtv model # LT The Tv...


Tv remote probally have dead CPU chip,all remotes devices heavily depended on it CPU chips.Try website like Remotes.com to buy an exact remote or very close to the original remote.

Feb 05, 2011 | Digital Lifestyle FA1B32Z 32 in. LCD...

1 Answer

Hi bought a 42 inch aoc tv two months ago. yesterday the remote control stopped working will not turn tv on or off or alter channels it will not work at all. I changed batteries but still same. the...


Normally, these remotes are programmable, I suspect that your remote lost it's programming maybe due to low battery condition. Look in your manual as how to reprogram your remote.

Dec 28, 2010 | AOC A20S431 Television

1 Answer

I have a remote that i have had for a while and it stopped working. I changed the batteries but it still doesn't work. I have the codes for it but i missed placed the instructions on how to set the code....


turn on manually your set (tv), push the code button on your remote control until led light, release the button, the led still ligth. push the tv button one pulse, push the power button several times until tv turn off. when this happen push enter button... try turn on the tv with remote control.

Mar 20, 2010 | RCA Universal Remote Control

1 Answer

ViewSonic RC00070P remote issue


Hi jdsoldan,
Where did you buy the new one? I have the same problem.
Thanks,

Aug 26, 2008 | Televison & Video

8 Answers

Viewsonic remote RC00070P


Okay here's the fix.
Remove batteries. Re-install them wrong side in! Don't panic.
Reverse the direction of both the battery cells and install. Press "Power" button a couple of times and a few other buttons a few times. Then remove batteries and re-install the right side in.
Voila.

Jun 10, 2008 | Televison & Video

Not finding what you are looking for?
ViewSonic N2750w 27 in. HD-Ready LCD Television Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74496 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...