Question about Frigidaire ATF6000ES Front Load Washer
There is an auxiliary switch in the door lock and switch assembly that
is activated at the end of the wash cycle for the machine to advance to the spin cycle.
This is a safety feature to prevent the door from opening during the spin cycle and the machine will not spin unless the switch is activated. The machine works except advancing to the spin cycle and this signifies
that the auxiliary switch cannot be activated and the door lock and
switch assembly is faulty. Replaced the door lock and switch assembly
(part #131763202) to address the issue.
Disconnect power to the machine. Open the washer door then look for the retaining hoop securing the door seal around the lip of the door opening. Stretch the retainer spring of the door seal retaining hoop then remove it.
Carefully peel off part of the door seal from the lip of the door opening near the door lock and switch assembly. Remove enough of the door seal to gain access to the door lock and switch assembly.
Remove the screws securing the door lock and switch assembly to the front panel. Once the screws are removed, lift the door lock and switch assembly then puI have a frigidaire affinity front loader washer - 1a4b866.jpgy from the front panel.
Take the door lock and switch assembly out of the machine. Disconnect tI have a frigidaire affinity front loader washer - febd08e.jpgal connections then connect it to the new door lock and switch assembly.
Put the new door lock and switch assembly back into position in the front panel and secure it with the securing screws.
Properly put the eased part of the door seal back over the lip of the door opening then secure it with the retaining hoop.
Posted on Jul 13, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Hey friend, thanks for your post!
I see that your Frigidaire washer will not spin on the final cycle. You could be having an issue with your motor or control panel. It is possible that the control panel is not sending the required information to your motor in order to process the spin cycle. Or it could be that the motor is not receiving the signal from your control panel to spin.
I would recommend performing a reset on your appliance which you can do by unplugging the power cord or flipping the circuit breaker for ten minutes. I hope this information is helpful. -Matt
Oct 08, 2014 | Frigidaire Washing Machines
Oct 15, 2013 | Kenmore 22422 Top Load Washer
Apr 01, 2011 | Frigidaire Affinity ATF7000ES Front Load...
Sep 29, 2017 | Frigidaire Affinity ATF7000E Front Load...
Jun 14, 2010 | Frigidaire Affinity ATF7000E Front Load...
May 14, 2010 | Frigidaire Affinity ATF7000E Front Load...
Dec 13, 2009 | Frigidaire Affinity ATF7000E Front Load...
Sep 06, 2009 | Frigidaire Affinity ATF7000E Front Load...
Jun 12, 2009 | Frigidaire Affinity ATF7000E Front Load...
2,199 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: