Question about Maytag MZD2665HE Stainless Steel Side by Side Refrigerator

1 Answer

My ice maker is jammed. I have taken apart the

My ice maker is jammed. I have taken apart the ice tray and believe I have figured out the problem. Would anyone have a diagram of how the ice tray should be put together. More specifically: The plastic cap at the back end of the ice tray should fit over the corkscrewed metal rod. Should the cap be centered over the end, or should it be offset? Thank you for any assistance you can provide.

Posted by on

  • scottpsamuel Jul 13, 2010

    Problem solved. If anyone else comes across this issue... The plastic end piece that connects to the metal rod can come loose and jam. If the metal piece lodges across the plastic piece, then you need to pull the rod back so that just the small end bent section of the rod is in the plastic piece. The plastic piece should rest in the center of the metal rod end coil.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 43,501 Answers

Hi,
Here are some basic tips for ice maker troubleshootingMy ice maker is jammed.    I have taken apart the - 2_bing.gif...

Ice Maker Problems and Ice Maker Troubleshooting
http://www.fixya.com/support/r3876071-ice_maker_problems_ice_maker

heatman101

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our ice maker jams and won't dispense ice also over fill ice tray or drawers


Heater for ice mold probably not doing it's job to help release Ice from mold. Replace ice maker.

Sep 12, 2017 | Refrigerators

4 Answers

Samsung SRS2029CSS ice maker in side by side, won't drop the ice out of the tray. The ice stays in the tray and after turning back upright, the water dispenses again flooding the freezer. I've taken it...


WHAT IS WRONG WITH YOUR ICE MAKER?

small_1_6.jpg For a detailed Ice Maker illustration, click below.

redarrow.gif In Freezer
redarrow.gif Free Standing
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

There are three common problems with icemakers:

There's no ice
Small or too few ice cubes
Specks in the cubes

Jun 07, 2008 | Samsung Refrigerators

1 Answer

Ice maker tray will not rotate and dump ice. It tries to, but only moves very little. What can I do?


I am a retired service technician. There is a strong possibility that you have a jam. Often ice makers become jammed with cubes that have not dumped. I have also found a plastic sandwich bag that has jammed the ice maker. So, first inspect for a jam.
If there is no jam then the plastic gearing is broken in the motor module.
Hopefully it is just a simple jam.

Oct 26, 2014 | Refrigerators

1 Answer

How to remove Kenmore ice maker 363.59572994?


I sure hope you got an awesome deal on that refrigerator. I would hate to think they charged extra for the mouse :-) Unfortunately, the ice bucket in this model does not just slide out like your other one did. You should be able to remove the front cover & flap of the ice bucket to reveal the ice maker and yes, it is bolted in. below is an exploded parts diagram of the ice maker. As you can see, the whole thing can be taken apart - of course you then have to put it back together. If it were me, I would toss it & replace the ice maker rather than try to disinfect/ sterilize the one in there. Good Luck!!
e2139196-00010.png

Jun 05, 2014 | Whirlpool GS6NBEXR Side by Side...

1 Answer

Samsung Ice Maker--Ice block and now no water flow...


Wait a few hours before you jump to conclusions. All depends on the position of the cam.

Aug 23, 2017 | Samsung RF265AA Bottom Freezer French Door...

1 Answer

REPLACING ICE TRAY ON LG FRIG


remove one screw on front left of ice maker, loosen two others-one in back and one on right, the ice maker will slide out. unhook wiring harness and the whole thing comes loose, couldn't figure out how to dismantle it but once I had it out of frig I let it warm up enough so the plastic would bend enuff to get it out.

Jan 09, 2009 | Refrigerators

2 Answers

Replacing Auger in ice maker


Kim There are two Screws Holding the Complete Ice unit in Place,After Removing it it unpluggs inside the freezer,It would be advised to Replace the whole Unit ttech

Jul 20, 2007 | Hotpoint HSS25GFP Side by Side...

Not finding what you are looking for?
Maytag MZD2665HE Stainless Steel Side by Side Refrigerator Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Refrigerators Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Maytag Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...