Question about Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV

1 Answer

Hi, I have a KDF-70XBR950. Had a lightning storm coming so heres what I did. The TV was on and had been running for a few hours and I was nervous we'd get a power surge so I shut off the tv and unplugged it. Obviously not considering the fan needed to keep running to cool off the internals. Anyway now I have the power/standbye led blinking 6 times and no tv. I tried parts changing a little bit and changed out the lamp and the cover for the lamp (had problems and fixxed myself before). But this stuff didnt help. Tried leaving tv unplugged all nite, then plugged in and let sit half the day. Still no picture and 6 blinks of the led. I'm figuring its a circuitboard, what say you. If it is can I change something out like this myself?

Posted by on

  • tomplows Jul 12, 2010

    Sounds like it is the problem. I havnt done anything yet to say whether it worked or not though. :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Hi,
6 times standby red light blinking shows problem with G1 Board (power supply) that does not output +17V and/or -17V
You need to replace G1 Board in your Sony KDF-70XBR950 tv, it is located next to right side of connections board if you look tv from its rear. G1 Board is mounted vertically and has 11 connectors to be unplugged.
Let me know if you need part number info of G1 Board if want to replace it by yourself.
Below exploded view shows G1 Board location in tv that will help you.
Thanks.

Hi, I have a KDF-70XBR950. Had a lightning storm - 3832c32.jpg

Posted on Jul 12, 2010

  • 1 more comment 
  • tomplows Jul 12, 2010

    Thanks Jee. Can you give me model number of g1 board and where would you get one from? I'm gonna give it a whirl on replacement myself. How hard could it be to swap out? Thanks so much Tom

  • Shahid Electronics
    Shahid Electronics Jul 12, 2010

    Required board part number is as follows:
    A1302365A .... G1 BOARD, COMPLETE
    and available in Sony Part Store for $45
    Put part number in above link search box to find out price info.
    Board replacement is easy as I mentioned before, unplug connectors on old board, unscrew it and take it out, put new board, tight its screws, plug connectors. Thats it.
    Thanks.


  • Anthony Matthews
    Anthony Matthews Nov 10, 2013

    I can't find G1 board. Can you find service that will repair A1302365Ad

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with KDF-70XBR950 TV. The TV won't come on. The power light blinks green for a few seconds than it blinks red for a while until it turns solid red.


How many time it blinks will tell you what the error is. This site will provide you with the service manual and on page eight of it will give you the list of blinks vs problems.
http://www.givemefile.net/smanuals/lcd_tvs/sony/file/8935.html ) ( The middle of the page is the download link "Download SONY service manual KDF-60XBR950 KDF-70XBR950 repair manual" )

May 05, 2011 | Sony Grand WEGA KDF-70XBR950 70" Rear...

1 Answer

KDF-70XBR950 70 in. Rear Projection HDTV Television My TV took a power surge and I?m getting the 3 blinking lights, I read online that it?s probably my g3 board. I check the lamp and the cover but...


Hi,
3 times red standby blinking light indicates Lamp Cover is not attached securely or Lamp has not been fixed properly inside tv. Make sure lamp and lamp cover are securely attached in tv.
I do not think G3 board is bad because 3 times blinking error is related with lamp cover that engages micro switch inside tv.
Let me know your findings to provide you more helpful info.
You can download service manual from This Site for little fee.
Thanks.

Jan 14, 2011 | Sony Grand WEGA KDF-70XBR950 70" Rear...

1 Answer

Sanyo DSs31820 dead after lightning storm. Is there a master reset?


A lightning storm will destroy a TV in many cases. I have repaired very few, with this problem. I would certainly find a new TV, if this is the case for sure. Thanks for asking!

Jul 11, 2010 | Sanyo DS31820 31" TV

1 Answer

Red light blinks 4 times


Hi,If your tv is close to 6000-8000 hrs or 2-4 yrs and haven't replaced the lamp yet, it might be time.The part # is XL-2100 you can find it here: http://www.discount-merchant.com/Sony-XL-2100U-TV-Lamp-p/sony_xl-2100u_replacement_lamp.htm and here's the instructions to replace it: http://www.fixyourdlp.com/guides/sony/XL-2100U.php

Mar 22, 2010 | Sony Grand WEGA KDF-70XBR950 70" Rear...

1 Answer

Black screen with sound on xbr grand wega 70 inch


Hi,If tv is between 6000-8000 hrs 2-4 yrs and havent replaced the lamp it might be time to do it so.Here's your part # XL-2100 you can find it here: http://www.discount-merchant.com/Sony-XL-2100U-TV-Lamp-p/sony_xl-2100u_replacement_lamp.htm here's instructions to replace it : http://www.fixyourdlp.com/guides/sony/XL-2100U.php Thank you and have a blessed one!

Mar 22, 2010 | Sony Grand WEGA KDF-70XBR950 70" Rear...

1 Answer

Sony Grand WEGA KDF-70XBR950 70 in


You need a new projection lamp.......(XL-2100 replacement DLP lamp)..... go to this web site to get the lamp you need for your TV model KDF-70XBR950 70inch----
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=11040980
------ This web site shows you how to install it yourself. ---- 
http://guides.fixyourdlp.com/sony/XL-2100U.php    --------- I strongly suggest that you get a SONY manufactured replacement lamp NOT a cheaper lamp from another manufacturer... it costs about $200.

Adelaide B.

Oct 30, 2008 | Sony Grand WEGA KDF-70XBR950 70" Rear...

2 Answers

Tv will not turn on after lightning storm


Defective HV transformer. (Likely lost it during the storm)...accordianman

Nov 28, 2007 | Orion TVDVD092 9 in. TV/DVD Combo

Not finding what you are looking for?
Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV Logo

Related Topics:

1,158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...