Question about Televison & Video

1 Answer

Picture My Tv has sound but no picture

Posted by on

  • 2 more comments 
  • johnscott495 Jul 20, 2008

    sound but no picture

  • Anonymous Jan 13, 2009

    I have a JVS i-art TV...it has no picture, but it does have sound...any solutions??? and how much does this usually cost to get fixed?

  • definitionof Jan 27, 2009

    I have a rca 36" model f36649 that the picture comes and goes but the sound still works. My question is am I able to fix it myself or does it have to be a tv repair man. I don't mind fixing the problem myself if it is possible.

  • tbtkbb Mar 14, 2009

    i have sound,no picture on my rca f32450 32"

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,635 Answers

This is very vague. There are a multitude of fault conditions that can cause this. Most often in the Sony CRT sets it is a high voltage and or scan failure. It is also possible that the CRT is no longer able to have emission.

The set would have to be properly diagnosed to have a definate answer.

Jerry G.

Posted on Apr 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv has sound no picture


lcd tvs usually get the picture, and the sound on separate cable parts, if picture part of the cable is damaged, no picture.
try to get a new cable
if not good, something inside the tv is bad.
go to service with it

Apr 13, 2013 | Televison & Video

1 Answer

My sanyo tv has no picture no sound 31"color tv


my grand son unplugged my sanyo tv 32in from wall while on no wi have no picture and no sound

May 17, 2009 | Sanyo DS31520 31" TV

1 Answer

Tv light stays on but no sound or picture and when you go to turn it off it comes right back on again with in a second.


When the tv light is on, the tv is in standby mode. ie no picture/sound. When the light is off then the tv is on with picture /sound.

Mar 16, 2009 | RCA 24V412T TV

1 Answer

TV power light comes on but no picture/no sound


chip on ic board repair shop might replace it and reprogram if the tv is worth the fix

Feb 05, 2009 | RCA Televison & Video

1 Answer

Sound but no picture at all


just Check for loose Solder.

Jul 31, 2008 | Samsung TX-R2735 27" TV

1 Answer

Picture is gone! :*(


the picture tube (what makes the TV picture work) has blown out. Just call you nearest tv reapair shop and purchase a new one. (these are kind of expensive!)

(Also, if it's fifteen years old, i think it's time to get a new T.V. hint. hint.)

Jul 03, 2008 | Zenith C27A24T 27" TV

2 Answers

No picture no sound


Last night i set childlock in my nikai ( NTV34010) tv set and tuned off by remote control.Then after some time later i tried to turn on tv but there is no sound and no picture.
will u please help me to solve it out.

Dec 02, 2007 | Panasonic CT-36D32 36" TV

1 Answer

Power light blinks and no picture


No picture - screen is empty. Sound is ok
Check IC101 (BA7630F), if video signal comes to input (pin 1) but not present at output (pin 14) then replace this IC
No picture and sound, only a high pitch sound at switch on
Remove horizontal transistor and measure the resistance across any two pins. This value should be no less than 200ohms
Picture fades away few seconds after start-up till no picture. Sometimes no picture at all. Sometimes picture OK for longer. Sound unaffected.
Faulty joints on CRT pcb. Cracked solder joints at tube socket connections on CRT circuit board. Caused variable supply to CRT heaters. Resolder all socket pins to pcb.

Nov 24, 2007 | Toshiba CZ36V51 36" TV

4 Answers

No picture but has sound


hello .this does sound like bad solder joints .all printed circuit boards do this after a while due to heating and cooling .is not advisable to try to repair yourself .possible electric shock and spiking .will do a lot of damage .take to a shop to have repaired

Oct 30, 2007 | Sony KV-36XBR450 36" TV

1 Answer

Sony tv picture keeps flashing


You likely have bad solder connections around the tuner area. This model has a history of problems in that area or the tuner itself.

Aug 29, 2006 | Sony KV-32S35 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...