Question about Office Equipment & Supplies

3 Answers

I have bought a Canon MP510 printer/scanner. I cannot figure how to change the photo size settings in Memory card mode to 6x4. I change it then save settings but always reverts back to a factory setting 11 x 8. Some instreuctions would be most appreciated

Posted by on

  • 2 more comments 
  • blubev Apr 21, 2008

    thanks for your help,but the problem is when I want to print photos direct from the camera flash card which I insert into the printer itself.
    There are two options for size 11x8 and A4 I change the size to 6x4 -load and save settings, but its not being accepted. I dont use a program on the Computer for this, it's on the printer.I think I should have just bought a simple printer, this is also a scanner and photo printer.

  • blubev Apr 21, 2008

    Thanks for your suggestion, I have a manual which tells me to specify print settings ' The settings you made in the Settings screen of the memory card mode are displayed.' There are two settings already there which I dont want and cant get it to accept 6 x 4
    I dont do the settings on the computer there's a panel on the printer itself

  • blubev Apr 21, 2008

    I dont think I explained this properly, I'm not trying to print photos thru the computer, there's a panel on the printer which is for use when I insert the flash card from my camera. It has two sizes already set which I dont want and cant get it to accept 6 x 4. I think this printer/scanner/ photo printer might be beyond my capability, but thanks for your help

  • blubev Apr 22, 2008

    It just tells me to specify print settings which I can find and save but then reverts back to another size. Anyway I can use the scanner and printer no problem so some success, but have never printed photos before.Will keep trying - many thanks

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Hey there blu

basically, when you want to change somethinng in any mode, your printer will ask you to save your settings right?

for you to do that, you must follow the basic setting rule.

check first on the printer settings, then follow thru the page settings , then configure the memory card settings.

it reverts back to the original settings because you havent changed the settings yet on your printer. so try to change the settings on the printer and page so that what you want to do on the memory card setting will follow.

ty

Posted on Apr 20, 2008

  • earl norman llanera
    earl norman llanera Apr 21, 2008

    ok!



    now i get you.



    your trying to print directly from camera to printer. athere are some tweaks on your printer for that i am sorry to assume that you were going to print it using your computer. now, siance this totally eliminates the use of the computer, please check on the settings of the printer and your camera. but i reckon that the camera has no tweaks for that and everything will be one the printer. what does your printer manual say?

  • earl norman llanera
    earl norman llanera Apr 22, 2008

    hey blue bev,



    have you tried tweaking the settings on your printer by saving the picture size.



    by any chance that we have assisited in any way, please dont forget to rate us.



    many thanks.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Do you have a manual for that? you can find it here

www.canon.com

Posted on Apr 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,142 Answers

All you need to do is to change the size in the software which you are using to edit the photos and do a save changes before you close the application,

Posted on Apr 20, 2008

  • Maanita Chadha
    Maanita Chadha Apr 20, 2008

    Can you tell me which software you are using to edit photos. i can tell you exactly how you can save the settings. Its basically the setting which you need to save during the print given.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I CANNOT GET IT TO PRINT 6X4 PHOTOS FOR ME. IT KEEPS TELLING ME THAT I HAVE THE WRONG SIZE PAPER


The default setting for 6x4 photos is 100mmx150mm paper. If the machine does not detect paper that size or has not been told where to find it, the machine will report a paper fault. Refer to the manual on the CD that came with the machine esp Ch2 P14 and Ch4 P22 for help in this. If you don't have the CD you can download the manual from the Brother Website.

Apr 10, 2016 | Brother DCP-J315W Inkjet Multifunction...

1 Answer

MG2500. How do I get it to print 6x4 rather than 4x6?


You may look to see if it is simply a matter of changing the printing from portrait or to landscape.

Jul 07, 2015 | Canon Office Equipment & Supplies

1 Answer

Canon scanner speed slow


Various ways....Try these! the slow problem wil get off

How to change the resolution (Windows)
The precision of printouts can be improved by changing scanning resolution.
The higher the scanning resolution is, the more precise the scanned images are represented, however, the file size gets larger.
The scanning resolution can be changed before scanning photos.
Note: When the scanning resolution is doubled, the image data size will be quadrupled.
When the data size is large, the throughput speed may slow down or may occupy too much of the computer's resources (memory).

<Procedures>
Memo: The following is explained using MP Navigator 3.0 procedures.
To scan using MP Navigator:
1. Launch MP Navigator and click Photos/Documents (Platen) on the Scan/Import tab.
80006642en_05sj00759_en_00.jpg- The window you see varies according to the printer model.
2. When the Photos/Documents (Platen) window is displayed, click Specify.
80006642en_05sj00760_en_02.jpg
3. When the Scan Settings window is displayed, select the resolution in Scanning Resolution.
If necessary, set other items as well.
80006642en_05sj00760_en_03.jpg
4. Click OK.
5. In the Photos/Documents (Platen) window, click Scan to start scanning.
6. Changing the resolution is completed.


To scan using the scanner driver:
1. Launch MP Navigator and click Open Scanner Driver on the Scan/Import tab.
80006642en_05sj00765_en_01.jpg- The window you see varies according to the printer model.
2. Change the resolution.
According to your purpose, set the resolution in Simple Mode with ease, or in Advanced Mode with a detailed setting.
- To set the resolution in Simple Mode:
(1) Select the Simple Mode tab.
(2) Select the output resolution from the Destination pulldown menu.
If necessary, set other items.
80006642en_05sj00760_en_05.jpg
- To set the resolution in Advanced Mode:
(1) Select the Advanced Mode tab.
(2) In Output Resolution, select one of the preset resolution, or enter the number from 25 to 19200 to specify your favorite resolution.
If necessary, set other items.
80006642en_05sj00760_en_06.jpg
3. Click Scan to start scanning.
4. Changing the resolution is completed.

Jun 01, 2010 | Canon CanoScan LiDE 25 Flatbed Scanner

1 Answer

I have a canon a470 ps i installed an canon sdc-32m card in it but still its captures only 12/13images...?


OK OK i understand . go setting in camera & save change the photo storage device in your memory card. i am 100 % sure right now all photos are save in your camera internal memory. just transfer it in memory card .

Jan 30, 2010 | Canon PowerShot A470 Digital Camera

2 Answers

I can't get my canon MP510 printer to scan. Can


If you are pushing scan and then black or color and the scanner is not working then check to see if the scanner loaded whth the rest of the options. Click start, chose printers and faxes, choose scanners and cameras, right click WIA Canon MP510, choose properties, check status. If not active or not there, you will need to reinstall.

Jul 26, 2009 | Office Equipment & Supplies

1 Answer

Printing


Sound like the paper size is set to 4x6 photo size. Check the settings on the printer settup display.

Mar 29, 2009 | Canon PIXMA MP510 All-In-One InkJet...

2 Answers

Pixma ip 3000


I think that if you use the bottom tray to load the paper, you can use the different sizes of paper to print. Make sure to click the second button inside the lid that shows the direction the paper is fed into the printer. hope this helps!

Jan 15, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Scanning Pictures from memory card


Maybe you have not saved the changes. Try transferring them first then resize.

Oct 19, 2008 | HP Photosmart 2575 All-In-One Printer,...

1 Answer

Canon Pixma mp510


The top-loading sheet feeder accommodates approximately 150 sheets (depending on weight), and the front feeder is good for around 100 sheets. Actual media sizes supported by the main feeder (top-loading) include A4, B5, A5, Letter, Legal, Envelopes (DL size or Commercial 10), 10x15cm(4" x 6"), 10x18cm, 13x18cm, 20x25cm, and Credit Card (54x86mm), while the front feeder is less accommodating with just A4, Letter, and B5.

Jan 27, 2008 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Printing photos onto 6x4 inkjet paper


which is the model of the printer, not all the printers permite to you do this

Oct 30, 2007 | HP PSC 2175 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

101608 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...