Question about HP LaserJet CP1215 Color Printer

1 Answer

I have repalced red cartridge in CP1215 laser

I have replaced red cartridge in CP1215 laser printer. Cannot get the light to go out and will not print.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I am not familiar with the model, but the toner cartridges I use have a tab you have to pull that is attached to a long plastic strip that releases the toner. This has to be removed before you can use the cartridge. Just asking to be sure.

Posted on Jul 14, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HP CP1215 Printing is blurred

should of included a pic of print.
Blurred prints are usually fuser related.

Nov 15, 2016 | HP LaserJet CP1215 Color Printer

1 Answer

What would make my black word barely print when my color is fine

If it's only the black that's effected it suggests that it's a problem with the toner cartridge rather than the printer itself. It may be a faulty toner cartridge, especially if you use cheap compatibles rather than genuine HP branded ones. You could try taking it out of the printer and giving it a good shake to make sure that the toner is evenly distributed in the cartridge. If that doesn't help then I think you need to replace the black cartridge. I had that problem with one of my colour cartridges but everything was fine after I replaced it.

Feb 26, 2015 | HP LaserJet CP1215 Color Printer

1 Answer


Sounds like you have a defective cartridge. Replace that cartridge and retry.

Mar 12, 2014 | HP LaserJet CP1215 Color Printer

5 Answers

HP Color Laser Jet CP1215: won't print at all since magenta is out. I changed printer to grayscale but just keeps blinking the magenta sing and the traiangle with ! sign next to it

I know the frustration being in IT for over 20 years working on various peripherals.
These printer MIX so that way there is a balance at the final phase. You have to purchase a magenta cartridge to get this working again. Bypassing this will make tis printer suffer and long term damage can cause a economical issue on your end in the long run.
Now if your at a critical point you can bypass but I do not professionally recommend this but here it goes.

1. Open the CP1210 Series Toolbox 2. OPEN System Settings 3. Then enable Cartridge Out Override 4. Then click apply
I hope this works for you, whilst you purchase a magenta toner. Please do not forget to leave a positive rating and feedback.

Best of Luck

Jul 26, 2011 | HP LaserJet CP1215 Color Printer

1 Answer

My yellow ink has just run out in my hp laser jet CP1215 i just want to print in black only is this possible and if so how do i get the printer to do this?

It is not possible to print while an empty cartridge is in the printer.
Try shaking the yellow cartridge and try printing again.
There may be enough toner left for a few more pages.

Feb 21, 2011 | Office Equipment & Supplies

1 Answer

When should I replace the toner cartridge? I found that red light is flashing( the lower light, totally there are 2 lights: upper one is green now). I don't understand what does it mean.

It mean when your toner is near empty,then red light flashing.tow light is fixed or red mean toner cartridge is empty.must be replace toner cartridge.You buy a new cartridge and put in your printer then printer is OK.
you can also get better idea please read printer user guide.

Mar 04, 2010 | Samsung ML-2240 Laser Printer

3 Answers

The red light is flashing and I can't resolve it. The printer is still functional, but I noticed that the paper is coming out very very hot.

go to samsung website and see if they have smartpanel for this printer,download to pc and run,will solve your problem

Jun 23, 2009 | Samsung ML-2851ND Laser Printer

Not finding what you are looking for?
HP LaserJet CP1215 Color Printer Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides