Unbalanced load- spin cycle stopped . cannot get machine to start

ul usually stands for unbalanced load,if a top loader then suspension rods have worn out, fron loaders are more complicated

Kenmore Elite Top Load Washer - Unbalanced Loads ...

www.shopyourway.com > Manage My Life > Questions

Recently, the "LF" code has started to display and the soak cycle will not complete unless I ... Kenmore Elite Top Load Washer - Unbalanced Loads During Spin Cycly ... Would a bad outer tub literally cause the basket to become unbalanced?

Fix Unbalanced Top Load Washer - YouTube

? 1:21
https://www.youtube.com/watch?v=cVZIGhULzg0
Jan 17, 2014 - Uploaded by Carpe Diem
How to fix unbalanced high efficiency top load washer. ... I am having a MAJOR problem with unbalanced ...

Off Balance load in spin cycle - Sears ... - YouTube

Is it a GE front loader ?

It stops spinning because the load is unbalanced. It will cycle over and over until the load is even then it will kick into a faster spin. Unbalanced loads could be due to too many items in the washer of a stabilizer problem in the hardware of the machine,

This is caused by an unbalanced load. Stop the washer and redistribute the clothing evenly. The knocking will stop.

Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks

It sounds like the sensing arm of the out of balance switch assembly is wrongly set. Get the guy back to do the job properly at no charge!

Hi!

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary.

Please do accept this solution and revert for further assistance.


Thanks

Rylee

hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

lid switch is broke lever probley broke off or screw holes broke out due to off balance load forcing tub over against switch lever