Question about Olevia LT27HVX 27 in. LCD Television

1 Answer

I can not find the channel for Dish Network.

I tried to look for the channel for the Dish Network, but evry channel from 1-130 said that "this channel is unavailable or something like that.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

This hopefully is resolved for you, but here are some easy steps if you ever run into this problem again. If you are at TV1 where the receiver box is located:
You want to make sure that the tv is on channel 3 or 4, and usually on an input. Since the tv says Channel unavailable, it sounds like you do need to be on an input. Try video 1 or 2, or cycle through your inputs.
If you are at TV2
You will want to make sure that your tv is on channel 60 or 73, and you will want to make sure that the receiver box has 3 lights on the front. (Blue, green, yellow.) You will need all 3 lights ont he receiver box for the TV2 to show a picture. I hope that this helps.

Becki Barned
DISH Network Customer Service

Posted on Jan 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to get my Dish Network to work on my Phillips HDTV. Dish Network told me that my television needs to be on channel 73 and when I try to put that channel in with the remote, the channel...


on your tv go to menu & somewhere there it will say scan for channels so it will scan for about 5 mins then grab your remote & turn to channel 73 & there you go . if not try moving the tv to a different source like AV or YDRB

Jun 23, 2011 | Cell Phones

1 Answer

I'm trying to get my 32 inch envision tv to change channels and it won't change at all!! I need to get it to channel 73 to work with my box free dish dvr that's in the other room!! Any suggestions??...


We would be happy to help with that. Some TV's do not havethe ability to go as high as channel 73; this may be the case for yourEnvisionTV. We would recommend changing the channel that your DISH Networkreceiver outputs the picture for your TV2. Start by pressing the"Menu" button, from the main menu press 6 for "SystemSetup", then 1 for "Installation", and then 5 for"Modulator Setup". Under TV2 we are going to change the mode to"Air", the channel displayed beside it should change to 60, selectdone on the right side of the screen to save the changes. Now change thechannel of your TV2 to 60 and you should get the DISH Network programming.

We hope this helps. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 14, 2011 | Envision L32W761 32 in. LCD TV

1 Answer

Dish network changed to snow when I tried to change station to channel 13. I pressed "power" for 5 seconds with no change.


Hi, Mary with Dish Network Customer Service here. It sounds like when you try to change channels with your remote, it is changing the channels on your TV and not your Satellite Receiver. In the top left corner of the Dish Network remote is an SAT button. When you try to change channels on the Satellite receiver this button should be lighting up. If the TV button lights up, it means the remote is working the TV. Press and release the "SAT" button after you have the picture back on the TV and it should work normally. I hope this resolves your remote issue!

Jan 12, 2011 | Toshiba Televison & Video

1 Answer

Cannot get a clear picture with dish network I have a Clear picture when using DVD


Sometimes the input/channel for the DISH Network and the DVD are different, and if using the same for both, then you will get an unclear picture on one. If at TV1, the tv will need to be on channel 3 or 4, and possibly an input such as video 1 or 2. The DVD player may be on a different input, such as video 3, or even just on channel 3 only. If at TV2, the tv needs to on channel 60 or 73. When using the DVD, try putting the tv on channel 3 or 4, that is normally the channel that the tv needs to be on. Also, make sure that the DVD player is not on while you are trying to watch just the dish.

Becki Barned
DISH Network Customer Service

Dec 03, 2010 | Apex Digital LD4088 LCD TV

1 Answer

I have the src2063wm twin pac remote controls. They set up OK for my Philips TV and my Dish Network Sat but when I try to change a channel on either my TV or the Dish Network, it jumps 3 channels. It also...


Hi my nameis Mike Houston of DISH Network and I see when you try to change the channel itskips some. There are a couple of things you can check to make sure allchannels are showing. Please press the Menu button on the DISH Network remoteand on the top left it will say All and you want it to say All Channels, then youwill want to make sure all the channels in you're Programming Package arethere. If they still are not showing please unplug the receiver for 10 secondsand after plugging it back in it will power up and acquire the signal anddownload the Program Guide, you will then want to make sure all channels areshowing. If you have any questions or concerns please e-mail me at michael.houston@dishnetwork.com.

Nov 20, 2010 | Philips Magnavox Learning Universal Remote

1 Answer

We move the tv from living room to bed room and we have to change the chanel from 3 to 60 to get the tv to work on dish network, we try to change from 3 to 60 we try evereything whit no result, we call...


Rescan all the channels?Hook the tv and the satalite signal cable in the tv and dish network box correctly check?Go to tv menu.Goto SETUP,pick CH. pick option CABLE enter to rescan all channels.This should have all the channels,belong to the package u order.

Sep 04, 2010 | Televison & Video

1 Answer

I would like the percentage between these 2 figures 1,130 & 1,058


It depends on which way you want to go.
100*(1,130-1,058)/1,130 gives 6.37% so the smaller number is 6.37% smaller than the larger number.
100*(1,130-1,058)/1,058 gives 6.81, so the larger number is 6.81% larger than the smaller number.

May 03, 2010 | Core Learning Calculation Skills: Volume 2...

1 Answer

I have a dish network remote control that I am trying to use to get to my video 1 or video 2 channels on my Sylvania 6420FF tv. The Sylvania remote is dead to the world and I need the Dish remote to get to...


You will need to by a universal remote in most circumstances as the Dish remote may not cycle through the inputs on your tv. You can try the recovery button on the remote it will have a small R on it. Press it many times to se if it it set to cycle through the inputs. Thanks for using Fix Ya.

Aug 01, 2009 | DISH Network 118216 Remote Control

1 Answer

Hooking up a tv


Hi first of all are you using scart leads to plug into each device here is how it should be set up ok
1. Scart lead from dish network into vcr
2. then other scart from vcr into tv
3. Now ti recieve the signal from the dish network you need to have the telly on the right av channel so that its picking up the signal from the vcr.
you can test this by changing the channel on the vcr controll or direct via buttons on vcr.
If the channels change then your on the right av channel.
Now when your on right channel on telly you need to now make sure dish network is on and on a channel or press the tv guide button just so you know what your looking for when the picture comes through.
You need to press av on the vcr controll this will then pick up the signal from the dish network via the scart lead as av is the channel for scart lead.
say if you was recording from dish net to vcr you would put the vcr on av to pick up the signal so press av on vcr controll this should then allow you to watch the dish network with no problems.
Let me know if you still cant and ill assist you further if it dont work tell me what you have done so i know how much you have done ok

Feb 10, 2008 | Toshiba TheaterWide 46HM94 46" Rear...

Not finding what you are looking for?
Olevia LT27HVX 27 in. LCD Television Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olevia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you an Olevia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...