Question about Pioneer PRO-710HD 64" Rear Projection Television

1 Answer

As soon as I turn the power on, it shuts right back off immediately. It will not stay on. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

There are leds inside that will light up @ the moment of shutdown.. one on the power supply lights up with ANY shutdown, but at the exact moment (like when you try to turn on from cold) of shutdown, another will light for a split second. depending on where this other red led is, will tell you which board is bad. I just spend like 10 hours working on a 510hd model so I know it like the back of my hand, let me know if you want to dive in. These tvs are notorious for having bad solder connections all over several board and can be fixed easily by a savvy tech with a solder iron. Let me know

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen stays on for about 20 minutes than shuts off after that..if you turn off and turn back on..it comes on then immediately shuts back off Its item #1704FPT 17" Monitor for 4700 Dimension...


On your Desktop, Right Click the mouse and Select Properties.
Click Screen Saver tab and Select Power. Change Turn Off Monitor
to Never. Your monitor should stay ON forever, until you turn its
power OFF.

Jul 21, 2011 | Computers & Internet

1 Answer

My car I10 magna 1.1 irde, when engine starts battery, oil etc warning lights shut off immediately but malfaction light & EPS light shut off one after one. Is this any problem pls clarify.


Ok, with the battery, oil etc lights are governed by simple circuits, and therfore, as soon as they receive power, and earth, they turn off right away.

With the other lights, the malfunction and EPS lights, these go through a self-test function where they check a number of sensors, not just one, and they do this very quickly......the malfunction light checks out 20-35 different sensors, and in less than 1-2 seconds, thats fast.........

However, if they STAY on, then this is where it detects a problem and you should come back and see us again.

If you liked this response, please vote !!!!!!

Jul 14, 2010 | 2007 Hyundai Accent GS Hatchback

1 Answer

Power immediately turns off with lens out and flash open


try these:-
  • connect it to pc and on it
  • vaccum the barrel of lens
  • changing mem. card and batt. for 2min.
  • shake it.
  • on and off in different positions

Aug 29, 2009 | Kyocera Finecam S3R Digital Camera

1 Answer

Tv shuts off for awhile then i can turn it back on immediately


hitachi is known for its problems and the best solution is to call a repairman out to repair it properly.i know thats not much help but its the only sure way to fix it and fix it right

Jan 21, 2009 | Televison & Video

1 Answer

Cd door will not stay shut


There might be some problem in ur CD rom motor that control the tray eject,,so u have to take it to nearest service center..

Dec 09, 2008 | IBM ThinkPad R40 2722 Notebook

1 Answer

I have a Pan. pt 51g30t shuts off immediately


The most likely part is a fault with the convergence board and the main power supply. In many sets like yours when an amp module on the convergence fails the picture will bend out of shape and cause the power supply to shut down
Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929

Jan 30, 2008 | Panasonic PT-51G44 51" Rear Projection...

1 Answer

RCA RT2250 consistant shutting off in Satalite mode.


Mine will always just turn off every minute or so after a hard shut down(ex: power outtage). I have to turn it back on and then hold the set button for a few seconds, then it stays on, until i turn it off manually, since the remote won't turn it off.

May 15, 2007 | RCA RT2250 System

1 Answer

Kenwood 1080VR - shuts down


try unpluging it all plug in sumware else see if it just turns on

Nov 16, 2006 | Kenwood 1080VR Receiver

Not finding what you are looking for?
Pioneer PRO-710HD 64" Rear Projection Television Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...