Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Code LL flashing. Will not complete a cycle.

Code LL flashing. Will not complete a cycle. Unplugging does not help. magtag neptune TL model FAV6800AWW

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 526 Answers

The LL error code is not documented very well.

Can you tell me what point of the Wash Cycle the Cycle Status LED is in when you error out with the LL error code?

I believe it will be in the Spin Cycle of the wash cycle.

You could try a Quick Spin test and see if the wash basket will spin up to 850 RPM with no laundry in the Wash Basket. See Page 14 of the Service Manual and see if the Wash Basket will spin up to 850 RPM.

You could also check the TDS for proper range of motion using the SM or this typed out process.
Tub Displacement Sensor Diagnostics check.
It is possible the Tub Displacement Sensor may have failed try this check which is in the Troubleshooting guide stored in your washer console or refer to the SM.

a. Enter the Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or the display reads “00”

b. Press the Super Wash key display reads “in”…something like that.

c. Press Delicates the Display will show “UC” (Unbalance Closed).

d. Push tub to the back right corner of the machine the display should change to “UO” (Unbalance open). Release tub and the display will show “UC” (Unbalance Closed).

e. Press Hand Wash.

f. Pull tub to the front left corner while pushing the tub down the display should change to “UO” (Unbalance open). Release tub and the display will show “UC” (Unbalance Closed).

If you fail this test it would be time to remove the machine front cover check if the TDS sensor has fallen of its mounting position between the Tub and the washer frame.

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer will not start , od code is showing on the panel


You have lost signaling from the Left Hand Lid lock.

The OD code is sent out from the Console main control board when a lid open is not sensed via the signaling from the Left Hand Lid lock for three completed wash cycles.

Google this sticky for help with your issue ""Neptune TL Washer FAV6800AWW"" start at the 5th post down. You will find a link to the service manual and help on troubleshooting your issue.

Sep 03, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Have Neptune FAV6800AWW top load, washes when it gets to the rinse cycle it stops with water in. If we remove the clothes and wait a while we can get it to complete. The code we are getting is DR which...


Are you sure the error code is DR? Could it be DC an unbalance error code. Google ""16022808.pdf"" to find. Is the washer banging around in Spin Cycle? If so this is a Clutch Pulley issue.

Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.

DR is not a listed error code in the FAV6800A/FAV9800A Service Manual.

Aug 27, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

HAVING AN ERROR CODE (OP) ON MY WASHER TOP LOAD MAGTAG NEPTUNE, WHAT SHOULD I DO?


If you want to DIY the issue Google "Sticky: Neptune TL Washer FAV6800AWW" you can get the Service Manual from that site to help you DIY the fix along with forum guidance.

I discuss the troubleshooting the Left Hand Lid Lock in that sticky.

I can't find my repair notes on this forum no Sticky and no Service Manual.......D*ick

Feb 27, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Makes a grinding noise and will not complete a cycle it stays on all night unless i turn it off.


I need a bit more info to help.

If you can confirm the model number to make sure we are discussing a FAV6800A or FAV9800A?

If we are can you put the machine in a Spin Only cycle and tell me the machine will complete the cycle with a wet load. If it doesn't complete the Spin Only cycle is there any banging of the wash tub in spin cycle? Is there any error code to Console LED (FAV6800A) or LCD (FAV9800A)?
If you want to investigate further I would suggest getting the FAV6800A/FAV9800A Service Manual.

Google this ""Neptune TL Washer FAV6800AWW""

This is a sticky for the FAV6800A/FAV9800A washer DIY support. Go to the 5th post down in the Sticky and you will find a link for the Service Manual.

If you want to go further in troubleshooting and possibly a DIY fix just open a new thread in that DIY forum with Model number and Serial number. That info is found tag behind the console right back side as you face the machine console.

Feb 24, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Won't progress beyond wash cycle -- start light is flashing. Cannot switch from "normal" to delicate or any other choice. Maytag Neptune TL FAV6800AW


So I understand the issue. Does the wash cycle start up? By that I mean if you release the washer top from the base do the tumblers turn once the water fill cycle is complete?

If you don't have the FAV6800A/FAV9800A Service Manual (you can't get it on line anymore) see this post Clutch Fix I describe how to release the washer top from the base to observe the wash basket. Don't raise during the water fill cycle wait till that completes.

Does the key pad beep as you press the other cycle select key pads?

This could be a Control Board issue...........Rich

Oct 16, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My Maytag will not run a complete cycle. Is there


mgissy


What is your machine model number? Is it a FAV6800A or FAV9800A TL?


If it’s a FAV6800A or FAV9800A TL do you error out in the Spin cycle of the wash cycle with an unbalance error code such as dC or uC? Is the wsh tub banging around during Spin Cycle of the Wash Cycle?

If so see this post Clutch Fix. I have a step by step maintenance/repair process for Clutch Pulley assembly issues related to the above error codes.

Post back if you have questions or concerns………Rich

May 03, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag neptune tl displays LL and stops during the rinse cycle


Sorry chukenne,
Having not experienced this issue on my FAV6800AWW I missed this error code in the manual is that your machine type? Error code “LL” is documented in the troubleshooting part of the SM as Large Load detected. Does this happen with all wash load sizes? I would go into Service Mode and step thru and document Diag codes form page 17 of the SM and see if you find any recorded error conditions. I would be curious to see if error code block 16 indicates a fail condition. I'm thinking of a possible high motor torque condition detected that may have triggered the LL code just a WAG at this time. You may want to clear all error codes and start collecting from your next wash cycle but I would make a list of all codes before you clear them for reference of fail events of past wash cycles. I’m going to assume the LL code happened during a spin cycle. What caused you to drop the clutch out and re-lube/ Were you taking dc/UC errors in spin cycle? Rich

May 27, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

I have a magtag neptune TL washer that stops after each spin cycle and gives a LL or LO on the timer screen. I can open the machaine and fix the clothes. Sometime this works snd then again it does not. I...


There is a service brochure inside the machine and you can access the info on the self tests by finding this brochure. It may be that one of the springs or balancers on the drum holder is bad, loose or broken.

Jun 09, 2017 | Washing Machines

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...