Question about Computers & Internet

1 Answer

How do I transfer image of tv monitopr using s-video port?

Posted by on

  • dabaers2 Jul 11, 2010

    please resound to follow up comment

  • dabaers2 Jul 11, 2010

    I have made the connection from a toshiba satellite r15-s829.
    Do you have any advice for this model?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,826 Answers

The s-video port is usually only an input on a tv monitor. So, you can't get output of the tv monitor in this way.


Posted on Jul 11, 2010

  • 2 more comments 
  • dabaers2 Jul 11, 2010

    I would like to transfer image from computer to tv monitor

  • dabaers2 Jul 11, 2010

    I want to tranfer image from computer to tv

  • Duane Wong
    Duane Wong Jul 11, 2010

    Many laptops have s-video outputs, like my Acer laptop I bought a few years ago.

    I never used the feature though, as all of my s-video monitors are gone now.



    However, get an s-video cable with male to male ends, and hook up your computer

    from its s-video port to the s-video port of the tv. It should work.



    If you have a PC desktop that does not have this feature built in, then get a graphics card for your desktop that has this feature. It might be kind of hard to match up the video ports (Vesa, PCI, or PCI Express) with the card and also have it have the s-video output feature.

  • Duane Wong
    Duane Wong Jul 11, 2010

    I checked for your model and it does not specifically say that it has an s-video output built in to the machine.



    However, if you look around your machine and find one, then that would contradict this.



    I learned, also, that you had windows XP on this machine originally.



    If you have an s-video output on it, then you might be able to connect it to your monitor, but I am inclined to believe that you can't.



    Graphics7

    • Intel Extreme Graphics 2 with 16MB-64MB dynamically allocated

    shared graphics memory

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I connect my Canon Camcorder MV700 to my computer Acer aspire L3600 ?


Please refer page 118 of the manual of Cannon MV700 available from this website.


http://files.canon-europe.com/files/soft24377/manual/MV690_MV700_Series_CUG_EN.pdf

You can connect camcorder with Acer Aspire using a USB port and cable.
But this interface only allows transfer of still images from the SD card on the camera. It will not allow video images to be transferred from the tape.

Some models of Acer also have flywire interface (IEEE1394) and also SD card reader. You can use these also to download video images from the camcorder.

May 07, 2014 | Canon MV700 Mini DV Digital Camcorder

1 Answer

How to transfer videos from Sony Handy Cam CCD TR 317 E


Check if you have a Firewire port that is either a 6pin or 4 pin port that looks like
85698237-3c77-4431-af71-e3d926026ab2.jpg
Use a firewire IEEE 1394 cable kit and appropriate software too transfer to PC. Most firewire to usb cable will not work.
You will need a
1. Firewire cable
2. Firewire port on PC/Laptop as well.
3. Recent OS that supports firewire.
4. Appropriate image/video editing software.

Apr 22, 2014 | Sony Handycam Video Cameras

1 Answer

How do i connect my dell latitude D610 to my Ilo tv?


Computers have become all-out media centers, capable of playing movies, music, and video games and even of streaming live television. Modern computers also come with an assortment of ports and outlets that allow easy connectivity to other devices, including televisions. Today's HDTVs can display high-resolution images ideal for showing off the media available on your computer, and they're relatively easy to connect.

Determine which type of cable to use; it will depend on which ports both your computer and TV share. Older computers and TVs will only have S-Video or VGA ports. Ideally, your computer and TV will both have HDMI ports, which allows for high-definition video and audio transfer. Consult your owner's manuals for port identification before deciding on which cable to use. Connect the computer's video outlet, either HMDI, VGA, or S-Video, to the TVs corresponding video input. These will usually be on the back of the TV and will be clearly labeled. Turn on your TV and set it to the proper video channel, which will correspond with the type of cable you have used. Some TVs have multiple ports for the same connection. Just set the video channel to whichever port you have used--for example, "HDMI 1" or "HDMI 2." On your computer, right click on your desktop and highlight "Graphics Properties," prompting a submenu to pop up. Highlight and click "Output to TV." Your computer's images should now be displayed on the TV instead of the monitor.
how to connect your PC or computer to a TV
http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-tv/

Feb 22, 2013 | Computers & Internet

1 Answer

Want to get my pc on tv


Computers have become all-out media centers, capable of playing movies, music, and video games and even of streaming live television. Modern computers also come with an assortment of ports and outlets that allow easy connectivity to other devices, including televisions. Today's HDTVs can display high-resolution images ideal for showing off the media available on your computer, and they're relatively easy to connect.

Determine which type of cable to use; it will depend on which ports both your computer and TV share. Older computers and TVs will only have S-Video or VGA ports. Ideally, your computer and TV will both have HDMI ports, which allows for high-definition video and audio transfer. Consult your owner's manuals for port identification before deciding on which cable to use. Connect the computer's video outlet, either HMDI, VGA, or S-Video, to the TVs corresponding video input. These will usually be on the back of the TV and will be clearly labeled. Turn on your TV and set it to the proper video channel, which will correspond with the type of cable you have used. Some TVs have multiple ports for the same connection. Just set the video channel to whichever port you have used--for example, "HDMI 1" or "HDMI 2." On your computer, right click on your desktop and highlight "Graphics Properties," prompting a submenu to pop up. Highlight and click "Output to TV." Your computer's images should now be displayed on the TV instead of the monitor.
how to connect your PC or computer to a TV
http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-tv/

Feb 22, 2013 | Computers & Internet

1 Answer

Hello I have some movies on my laptop but now I want to wach them on tv on my TV I have only scart-input,experts told me I need a cable with D15 connecting from my laptop to one transformer to my...


Most Laptops use S-Video as a way to display video on your TV screen.
You can pick up a S-Video cable at your local Electronics store IE Radio Shack. Before purchasing the cable ensure your TV has the correct input.

The four main types are (in increasing quality):
1. S-Video [2 types: 4Pin as in picture'7Pin]
Port: http://www.coloredhome.com/video/s-video...
Cord: http://akamaipix.crutchfield.com/graphic...
2. VGA
Port: http://upload.wikimedia.org/wikipedia/co...
Cord: http://www.thisishowyoudoit.com/blogimag...
3. DVI
Port: http://vocaro.com/trevor/blog/wp-content...
Cord: http://www.tech-faq.com/dvi-hdtv-connect...
4. HDMI - also transfer sound signal
Port: http://media.bestofmicro.com/,2-3-49323-...
Cord: http://www.k1cable.com/images/hdmi_000.j...

All of these do the same thing: The laptop sends the video information through the Port and the Cord. Your TV Recieves that information in its port. Numbers 1 to 3 do not transfer sound, so you will need a separate adapter for your headphone to TV Audio. #4 HDMI transfers both sound and audio data, so you won't need a separate cable for sound.
Check if your TV has corresponding ports. If not, you can buy adapters. This is an example of a VGA to RCA(Red/White/Yellow analog cables) and S-Video
http://img.alibaba.com/photo/52306528/VG...
Thanks for rating good luck

Jan 13, 2011 | Computers & Internet

1 Answer

I have a sony dcr-trv 22e camcorder and i am not able to transfer the images to my laptop via usb,the images are not captured and the i get the cption that that device not detected.


If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer using i.LINK cable.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820


If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Good Luck!!!!!!!!!!!!!!!

Sep 17, 2009 | Sony Video Cameras

1 Answer

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO...


hi dear


Laptop Multimedia Ports Info
video_out_imgpcmag.gif

Component Video Out: Connects a TV or HDTV to your notebook so you can view high-quality, high-definition video streaming from the notebook. This three-piece connection (color-coded red, blue, and green) is the best method for sending video from your notebook to an HDTV or anything that receives component video. This connection allows the chrominance (color) and luminance (brightness) portions of a video signal to be processed separately, thus producing higher-quality video than an S-Video connection. S-Video works similarly, but component video improves color accuracy even further by splitting the chrominance signal into two portions.
Composite In/RCA: Connects a gaming console or camcorder to your notebook, for viewing video or playing games on the notebook. Color-coded red, white, and yellow, composite video input uses standard RCA-style jacks to connect your notebook to receive video and audio signals from your TV, VCR, game consoles etc.
tv_tuner_imgpcmag.gif

TV Tuner/75-Ohm Coaxial: Connects a cable box, TV, or VCR to your notebook, so you can watch and record TV content on the notebook.
Sometimes called an Rf input, a 75-Ohm coaxial cable can carry video and stereo signals simultaneously. RF cable connectors (often called F-type connectors) screw onto the 75-ohm jack, are pushed onto it, or connect via a dongle that vendors usually supply.
spdif_imgpcmag.gif
S/Pdif/Dolby Ac3 Digital Out: Connects your notebook to speakers or a stereo receiver to play digital audio stored on the notebook. S/PDIF (Sony/Philips Digital Interface) is a standard audio-transfer file format, usually referred to as digital audio. This connection allows the transfer of audio without converting the signal to and from an analog format, which can degrade its quality. If you also have an S/PDIF In port, you can play digital music stored on an MP3 player through your notebook. The headphone jacks found on some notebooks double as S/PDIF Ports.
dvi_port_pcmag.gif
DVI: Connects a digital projector or LCD panel to your notebook to display in large format either video content or a PowerPoint presentation stored on the notebook. DVI (Digital Visual Interface) is a multipin connection used for passing standard-definition and high-definition digital video signals. It's found on HDTV tuners, a growing number of DVD players, HDTV-ready televisions, and some computer displays. DVI-D is the type of DVI connection found on most home video gear and carries digital-only signals. DVI-I is used with some computer video cards and can pass both digital and analog video signals. Some TVs have DVI-I inputs for greater hookup flexibility. DVI connections transfer video signals in pure digital form, which is especially beneficial if you're using a fixed-pixel display like a plasma, LCD, or DLP TV.

firewire_port_pcmag.gif
Firewire/ I.Link 400/ 1394: Connects a digital camcorder or external hard drive to transfer (but not display) large files, such as MPEG video, to your notebook. Also known as IEEE 1394, this is an extremely fast (commonly up to 400 megabits per second), two-way digital connection used for plugging in Your DV camera or other peripherals (such as an external hard drive or optical drive) to your notebook. It is used in digital camcorders because it is one of the few connections capable of quickly transferring full-motion video.
s_video_in_pcmag.gif
S-Video In: Connects a digital camcorder to your notebook to display video stored on the camera on your notebook's screen. Also, if your VCR has an S-Video Out port, you can transfer your VHS tapes to digital format. S-Video inputs use a four-pin jack to receive video signals from camcorders, gaming consoles, TV, or any device that has an S-Video out port. the S in S-Video stands for separate: S-Video connections transmit the chrominance (color) and luminance (brightness) portions of a video signal along different paths, allowing them to be processed separately, though S-Video does not produce as vivid an image as component video. This is a common way to display content from a digital camcorder or any device that has an S-Video Out port. (Firewire also transfers data files from your camcorder to your notebook, but it can't display video in real time on your notebook.)
S-Video Out: Connects a plasma or newer TV to your notebook to display video content streaming from the notebook. The most common way to connect a TV to a notebook, S-Video Out uses a four-pin jack to send signals from your notebook to your TV or anything that accepts S-Video In.

and use Fn+F5 or Fn + F4
to switch your ntbook to tv


oke

Mar 22, 2008 | Computers & Internet

2 Answers

Cannot transfer video to Laptop computer through USB


try getting a ExpressCard or if you have a later modle try a CardBus that has firewire then use a firewire cadle to transfer the video

Mar 11, 2008 | JVC GR-D290 Mini DV Digital Camcorder

1 Answer

Transfer video from tape to computer


mjtlj:

You will need a firewire cable to successfully transfer video from your tape to your computer. It also greatly helps to have a firewire port on your computer. Once you have connected your firewire port on your camera to the firewire port on your computer, you can use windows movie maker to transfer video to your computer. (File > Import for Digital Video Camera)

If this has helped you, please report this problem as fixed :)

Jan 08, 2008 | Samsung SC-D363 Mini DV Digital Camcorder

1 Answer

How do I transfer video and stills to my computer?


Palmcorder Digital Camcorders offer you three easy ways to transfer images to a compatible PC2. * i.Link Lets you connect your camcorder to a PC for advanced viewing and editing purposes3. This digital technology also lets you connect your camcorder to a similarly equipped camcorder to make duplicate copies of your recordings with practically no loss of picture quality. * CARD LINK SD Memory Cards offer a simple, lightweight way to transfer your images to a PC4. It even lets you create images on your PC to use while you shoot videos with your camcorder. This revolutionary medium is included on all models with the CARD LINK function. * DV Studio This convenient feature allows you to link the camcorder to your computer via the USB port. Then, you can easily transfer still images captured on Mini DV tape to your computer4 for use in e-mail or printed documents. Please Note: 3-Way PC Link features may or may not be compatible with other operating systems.

Sep 06, 2005 | Panasonic AG-185 Camcorder

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...