Question about Logitech QuickCam Connect Webcam

1 Answer

Webcam installation i installed the logitech 1.3MP C300 webcam and used it once and it was fine after that i wanted to use it and its not working,, its like a usb when i put it nside the comp its icon doesnt show even in my computer.. so wats the problem??????? I lost its CD too:(

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

When you installed the camera did you use generic Windows drivers? If so, try going to the logitech website and downloading the latest drivers for the web-cam. Unplug the camera before installing the new drivers, it may prompt you to plug in your camera, if not plug it in once the installation is complete. Restart your computer and make sure your plugged in as well if it is a laptop. Another reason for no response could be no power is coming through the USB port, either because the power connection is burnt out (this doesn't mean that powered USB devices don't work in the port) or it reverted to a 1.1 version of USB. This is a common glitch that can usually be fixed by changing USB ports or restarting the computer. Make sure you don't have too many devices being powered only through the USB port. If any USB product also comes with an adapter always use that adapter if possible instead of using the USB to power it. This will ensure a longer life of your ports. If the latest drivers are installed and you know you have a working USB port that provides power then you more than likely have a bum camera. (Electronics generally fail either very early or very late in their life cycle)

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could anyone possibly help me out? I have a logitech Webcam C300. I works fine for things like skype etc, but it won't let me post pictures or videos on facebook? It takes the picture, but when I click...


Sounds like it is working fine, your problems may lie where the camera is trying to save the photos on your computer. can you set the default save location for photos and video?
It may be trying to save them in a location that does not exist

Sep 12, 2010 | Logitech 13MP WEBCAM C300

1 Answer

How to install and use the logitech web cam,i dont have the cd installer..


You can download the driver here. Once installed try this free webcam test site to verify it is working properly, and then you will be ready to go.

Sep 03, 2010 | Logitech QuickCam Communicate Deluxe...

1 Answer

Want to download logitech c120 web cam but given cd not working so is there any link to install the software


Go to Logitech.com, Support tab, under Webcams, and find your model. It will allow you to download the driver. Once downloaded perform a quick test on the free webcam test site to verify all is working properly.

Aug 28, 2010 | Logitech QuickCam Connect Webcam

3 Answers

I cannot load the installation on to my new computer, windows 7 . It was fine with vista. it is1.3MP C300


mcdevito75 here, You should be able to up-date your windows 7 to vista, for your home page type in up-Date windows OR! left click on tools (very top of screen) then click on windows up date.

Jul 05, 2010 | Logitech Webcam

1 Answer

I lost my installation cd for Logitech Quickcam Chat


you can get the software in logitech.com try that once.

May 27, 2010 | Logitech QuickCam Chat Personal Web Camera

1 Answer

Would logitech webcam C300 work for windows 7


Yes it will with the new driver just released from Logitech.
Follow this link, choose either 32 or 64 bit, download and install.

http://www.logitech.com/index.cfm/584/5798?osid=14

Nov 28, 2009 | Logitech Webcam

2 Answers

My Logitech C200 webcam video freezes 20 seconds into a call


Go to Start->Control Panel->System->Hardware->Device Manager. Here locate your webcam, select it and delete it. Now disconnect the webcam from the laptop. Reboot. Insert the Logitech CD and install the drivers afresh. Reboot. Connect the webcam and allow Windows to detect it and load its drivers. Windows will take a long time to do this. Now configure the Instant manager to use this webcam as default camera. And start using. But before you do that start the webcam program to use this camera to check if it takes the video continuously. I do not see any problems now. Trick with Logitech is to load drivers with the device disconnected.

Nov 20, 2009 | Logitech Webcam

1 Answer

I have ASUS Eee PC 900a and I want to buy a


I would recommend Logitech C300 1.3 megapixel or C600 2 megapixel at $90 - $130 Australian Dollars. They are both designed to clip to the top of your laptop screen and provide top quality video. You can spend a lot more on night vision cams and better quality but for general use im sure they will keep you satisfied. And no i dont work for logitech i have the cheaper model of what i just said and i chat with family worldwide and that suits me fine.

Oct 30, 2009 | ASUS Eee PC 900 PC Notebook

2 Answers

Hi, whenever I install my Logitech Quickcam Pro 9000, it would always slow down my laptop, sometimes it would be so slow that a "low memory" would pop out. My RAM is 1.00 GB and I have already uninstalled...


The logitech software runs constantly and uses too much processing power. try plugging it in without the softwarer being installed and see if it will let you use it. If it doesn't you need to go to the logitech website and see if you can download just drivers.

Apr 05, 2009 | Logitech QuickCam Pro 9000 Web Cam

Not finding what you are looking for?
Logitech QuickCam Connect Webcam Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...