An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: netgear wireless router wgr614?
If you cannot login to the router's configuration URL, then you can reset the Netgear back to the factory defaults by powering up the router and press the pinhole RESET button at the back of the router until the LEDs turn on, then release the RESET button and wait for the router to reboot.
Then connect a LAN cable from the computer to the router open an Internet Browser and enter the router's configuration URL http://192.168.0.1
The default login = admin
The default password = password.
You can now configure the wireless settings, Eg. SSID, encryption etc.
To secure your wireless from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
need to get ps3 component cable that can hook directly to the router,if it is a wireless router goto ps3 setup menu,then turn on network discovery on ps3,then will ask for password from router fill password in,it will hook up.
to create a network security key or password for your router you need to access the 192.168.1.1 or www.routerlogin.net but be sure that you are connected hard wired to the router. after typing it, it would ask you for a username and password which is "admin" for username and "password" for password. it would take you now to the netgear page. on the left side of the screen you would see the wireless settings button. click on it. there you can start configuring the network name and password for your wireless. and just click apply settings.
To access the router: 1. Type http://www.routerlogin.net in the address field of your browser, and then click Enter. 2. When prompted, enter admin for the router user name and password for the router password, both in lowercase letters. (For security reasons, the router has its own user name and password.) 3. On the main menu, select Wireless Settings to display the Wireless Settings screen. Note that the default SSID is NETGEAR. 4. You will now see your wireless Security Option and passphrase.
connect your router to computer with ethernet cable. Then you can access it with following link. for belkin routers http://192.168.15.1 for other routers http://192.168.1.1 or http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password" Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi. Let me know if you need further assistance.
You can find the wireless security password by accessing the router'sadmin page http://192.168.0.1 (username is admin and password is password) then go to the wireless security tab.There you can find the password or WEP key (10-digit code). If you can't login to the router'sadmin page, you can reset the router by pressing the reset button atthe back of it for 20 seconds then power cycle the router by turning itoff for 10 seconds.