Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Filled with water then stopped with red spin light on Is there a reset button it just beeps

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting.Please confirm that the SPIN light is the only light on when the machine is beeping.This fault as indicated in you 1st posting tells me that your MOTOR CONTROLLER is faulty and needs replacing.Please reply and confirm the lights that are lit.Looking forward to your reply.

Posted on Jul 11, 2010

Testimonial: "The second third and spin light was on I unplugged the machine for an hour unloaded the clothes then restarted the machine a couple of times and lo and behold managed to wash 2 full loads thx for your thoughts"

  • rstratz Jul 15, 2010

    My washer did the same thing, then water leaked out from beneath it and now I tired to do another load and it totally went out and won't even turn on now.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher & Paykel Pride 5.5 won't wash. It fills with water then starts to beep. I can advance it to the rinse stage so it drains the water, once the water is drained, it starts to beep again. The...


Hi - the out of balance switch has activated this will be found under the lid right side if you bend lw enough you can see it hanging by a lever - it may have activated from the previous cycle - it needs to be freed - put it outside of the bowl and be sure its free to operate - if not it needs to be removed and replaced.

Jul 12, 2011 | Washing Machines

1 Answer

MY GW709 STOPS DURING FILLING UP WITH WATER AND IF YOU PRESS THE SPIN BUTTON IT WILL SPIN AND STOP FOLLOWED BY AN ALARM


Hi Benjimin,just read your posting.Now when the machine stops and beeps it will light up a series of lights.These lights will be in a row of 8 lights.Starting from left to right which ones are lit?Is it the 2nd and 4th or the 3rd and 7th ----etc----?Please reply with additional information and I am sure I can help you.

Aug 22, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

The washing machine fills with water but then appears like it struggles to spin and then it stops attempting to spin, then starts to beep and flash lights. the lights that flash are the middle green...


Hi just read your posting.Now the lights that are flashing are an ERROR CODE .On the row of 8 lights that these lights are flashing which ones are flashing,starting from the left to right of the row is it the 2nd and 3rd and 8th or the 1st and 4th and 7th ---etc---?Please reply with additional information and I can help you rectify this fault.Looking forward to your reply.

Jul 30, 2010 | Fisher and Paykel Washing Machines

2 Answers

The lights come on, but the machine doesn't start


do you hear a beep when the start button is pushed? if u do hear a beep then it could be your lid switch is faulty, if you dont hear a beep then your keypad is faulty. is the plastic covering the buttons cracked?the keypads fault sometimes because water goes thru the cracks into the electronics causing it to corrode. please reply with answers 4 more help.

May 06, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Have kelvinator smart drive 503, water won't run


Hi,

I have exactly the same issue, which first appeared yesterday. Following your advice, the lights that are lit are 3rd, 5th, 7th and 8th. The SLOW & HOLD spin speed lights are lit, along with constant beeping :)

Jun 16, 2009 | Fisher and Paykel GWL11 Top Load Washer

3 Answers

GLW10US won't do anything but beep


well i don't have any experience with this brand but i would say you need to change the fill switch it senses how much water is in the tub shuts the water off then starts the washer its also called the pressure switch

Feb 16, 2008 | Washing Machines

2 Answers

Fisher and Paykel (Old model) Fresh 5.0


you probably have a foreign object in the pump impellor - the favourite is bits of bra wire

May 05, 2007 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...