Question about Foxconn G31MXP-K Core 2 Quad/ Intel G31/ DDR2/ A&V&GbE/ mATX Motherboard G31MXPK
Hi motherboard - G31MXP-K My name is Guilherme and My computer resets Every time I start watching tv using my plustv isdbt usb stick. Sometimes I get the message IGXPRD32 stop to work and I have to re-start the computer manually. My question is : Is there any update of Video Drive I can Install? or any configuartion I can do to solve this problem? It seems a hardware problem to me. also I have two cameras attached in a pci capture card and the same problem happens after few minutes ( hours sometimes ) that I start the camera's application. any idea? thanks in advance
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Cannot Install Windows
Well it sure sounds like an overheating problem, and 77 degrees celcius is way too high, specialy if it's right after boot! try reseatting the heatsink and make sure the repair place put a thin coat of heatsink compound paste on the processor. You need to bring that number down so really pay extra attention to the heatsink.
The next thing would be a bad memory module check out http://www.cas411.com/ShowArticle.aspx?ID=66 , it talks about surprising behaviors of PCs when a memory goes bad.
Hope this helps!
Posted on Mar 24, 2008
This is an oldtime POST code memory error. Likely that ram is either installed wrong, bad RAM or the mobo doesn't like one of the memory sticks.
You must count the beeps.
Posted on Mar 20, 2009
SOURCE: No monitor display
Hi, first verify motherboard BIOS jumpers if it's on right position, if the board has an integrated video card, remove the pci e video carnd and test with the inside one.
If you have more than one DDR memory, use them one by one.
Do this with all components desconected, like hard disk, dvd-cd rom...
If no video display, try with another power supply and all components desconected.
If you got no video the motherboard could be damaged.
Posted on May 02, 2009
SOURCE: new motherboard
you need to check the pins setup on the motherboard, then check that you installed all the drivers for it...let me know
Please do not forget to rate the service for the site to continue helping everyone and improve on it.
Posted on Sep 16, 2009
Tips for a great answer:
Apr 17, 2013 | Computers & Internet
Aug 16, 2011 | Foxconn FC-G31MXP-K Motherboard
Oct 25, 2010 | Foxconn G31MXP-K Core 2 Quad/ Intel G31/...
Sep 23, 2010 | Foxconn G31MXP-K Core 2 Quad/ Intel G31/...
Jun 07, 2010 | Foxconn G31MXP-K Core 2 Quad/ Intel G31/...
Nov 10, 2009 | Intel DG31PR Motherboard
Sep 05, 2009 | Foxconn G31MXP-K Core 2 Quad/ Intel G31/...
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: