Installation of bello gaskit

Gaskit is old or loose.

go to google. and enter your machine model # for wiring diagrams.

If you hear of a solution, let everyone know. Our machine did the same thing. From the research I have seen, GE makes **** machines and I will NEVER buy a GE product again.

Theres an electric water valve. You have to find out if its the hot or cold thats leaking and replace it.

Have the shipping bolts been removed? Look in the user manual to locate these.

1. Changing the front boot
   
2. Cycle Not Advancing or Timer Stalling Symptoms Update
   
3. Motor won't run helps
   
4. New fault codes for the electronic controlled Frigidaire built front load washers 
   
5. Noise problems or rust on the clothes
   
6. Need help naming that part?  Washers - various models  Interactive
   
7. Operation and installation tips
   
8. Won't drain water helps
   
9. Odor problems with your tumble style washing machine  
   
10. How to remove and replace the drum gasket on the Frigidaire - Kenmore ( 417.###### ) Front Load Washer with notes on tub bearing replacement and inner drum replacement
    
11. Washing one item in a front load washer
    
12. Some door switch helps 
    

1. Changing the front boot
   
2. Cycle Not Advancing or Timer Stalling Symptoms Update
   
3. Motor won't run helps
   
4. New fault codes for the electronic controlled Frigidaire built front load washers 
   
5. Noise problems or rust on the clothes
   
6. Need help naming that part?  Washers - various models  Interactive
   
7. Operation and installation tips
   
8. Won't drain water helps
   
9. Odor problems with your tumble style washing machine  
   
10. How to remove and replace the drum gasket on the Frigidaire - Kenmore ( 417.###### ) Front Load Washer with notes on tub bearing replacement and inner drum replacement
    
11. Washing one item in a front load washer
    
12. Some door switch helps 
    

Obviously you need to find the leak and repair it...duh

it is very hard to get the ring on front load washers,
it is much easier to remove the top. bottom and the front control panel
then the door and support panel.
now you have access.
some times you have to remove the counter weight in some models before putting on the ring.
if you can do it without removing these items you are very very good.

usually ther is a transit bar that has to be removed that holds the gerbox in place
chek that it has been pulled out from the back