Question about Whirlpool Washing Machines

1 Answer

Shaking or vibrating on every spin with the U Sign

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,554 Answers

The machine control detected an unbalanced condition as manifested by the vibration. Redistribute the load then rerun a spin cycle. Check the suspension system if the unbalanced condition do not cease to exist after redistributing the load.

Please indicate the exact model number of themachine for specific troubleshooting and repair advice. You don't have to accept or reject and rate this post to add information or post comments and follow-up questions. Accepting a solution does not stop you from posting comments or follow-up questions. You can continue communicating with an expert as long as you need assistance regarding the issue stated herein.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibration that shakes the whole car


If this engine has a fan clutch check to see if the clutch spins freely when the engine is shut off. If its frozen that will cause a vibration which will shake the entire car.. The next item of interest would be the torque convertor in the transmision. They can shake a car very well also

Jan 23, 2010 | 1995 Mercury Cougar

1 Answer

My 1998 chevrolet silveradoo 1500 is vibrating when I drive in 4 wheel drive


sounds like the front u joint is fried when it spins it vibrates like a bastrd and shakes you stupid on the highway

check the driveshaft from transter case to diff but remember there are u joints in some outer ends of the axel shafts too

good luck remember if it shakes it's a bad thing especially if it's in your driveline

Dec 31, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

An extreme vibration in spin cycle. It makes the


Because front load washers are VERY HEAVY, they shake if you have a wooden floor. If your front loader sits on concrete and it still shakes, then you have to make sure all is balanced. If it still shakes, then inside the system there are shock absorbers that need to be checked.

Nov 12, 2009 | Frigidaire Affinity ATF7000ES Front Load...

2 Answers

Our front load washer vibrates so much durning the spin cycle it actually knocks the dryer off the top of it. It will also vibrate across the floor unless 2 people are holding it down. We have tried the...


make sure that the nut on the leg is tihgtend down. check level lower on wash machine if all else fails buy shake away pads follow the install directions and see if that helps. i love my shake aways my floor doesnt vibrate any more.

Jul 09, 2009 | General Electric WSSH300G Front Load...

1 Answer

Front loading machine abnormal strong vibration on the spin cycle


Check the tub rollers or wear plates.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 30, 2009 | Kenmore Washing Machines

1 Answer

Shakes during spin cycle


Most out of balance problems are from the clothes in it. Stop it, move the clothes around - kind of even out the load and try again.

Mar 29, 2009 | Washing Machines

1 Answer

Washer is shaking violently when it is time for the spin cycle


Hi you must make sure its level in all directions. ie front to back and side to side. Alos dont overload it. If its on a wooden floor it will vibrate. A concrete floor is the best

Feb 15, 2009 | Washing Machines

2 Answers

Washer drum shakes excessively during fast spin


y shaped piece that contains the spindle that attatches to the basket and allows it to spin is corroded and cracking. you can't buy just the spindle bracket, you must buy the basket too. you'll be buying the front part of the drum too, if you wait to long.

Feb 10, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Excessive vibrations


I have ordered KE shake away pads. I'll have to see how they work.

Jul 01, 2008 | GE Washing Machines

1 Answer

Front loader vibrates and moves


You shd check the front legs - they shd be a maximum screwed up, that is the machine shd be tilting forwards. Then you adjust acccording to your floor level. The machine should not shake a bit when off, & you try to shake it with both your hands.

A little vibration is normal when the spin starts. Don't forget to rate me nice............

May 24, 2008 | Kenmore 46462 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2287 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...