Question about Oregon Scientific TP329 Two Way Radio

1 Answer

Channel scanning fucntion won't work on my new Oregon Scientific TP329 Two Way Radio. Keeps scanning without finding a valid signal. The radio works when I set the channel randomly but so far I can't find a channel which is reliable over over even 500 metres. Oregeon suggested I remove batteries and leave powered off for a few hours, but makes no difference. Please advise. Thanks. Sean.

Posted by on

  • sean9cody May 06, 2011

    Many tnx. So this shows me how to scan the channel on one set to the same channel on other set - correct ? If so, your advice automates what I was already doing manually (which is good :-). Now the question is, how do I find the channel with the best signal. Is this by trial and error and will it depend on conditions in each locality I use the transmitters?



1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Make sure there is a transmitter "on" somewhere along the way, otherwise it would not stop scanning. Try keeping the PTT pushed on the other set whilst you scan.

Posted on Apr 28, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I reset to default?

Did not find it in the manual either. They suggest taking the batteries out. Try that, but leave them out for 30 seconds. Post if you need more.

Oct 31, 2015 | Oregon Scientific TP329 Two Way Radio

1 Answer

Where to buy a charger for oregon scientific radios

Hi Coll,

Because these are specialised radios, they would come under office equipment forum, your query was posted on two way radio forum by mistake. Could you pls re-post your query on the office equipment forum so that the team there can assist you.

Cheers, Peter@FixYa Team

Nov 30, 2012 | Oregon Scientific TP329 Two Way Radio

1 Answer

I have a scientific radio controlled clock - modelRM913TCN and I don't have a clue how to set it

Your device can set the clock automatically by means of receiving radio signal for synchronization.
But if you want to know it I give you this link from where the complete user guide can be download for free:

Using this link you have to wait a little bit and copy a security code then you can start downloading.
Good luck.

Jul 14, 2011 | Oregon Scientific Audio Players &...

1 Answer


You can download and print the manual (English only), at no cost, here:

Bill B.

Nov 30, 2010 | Oregon Scientific TP329 Two Way Radio

1 Answer

My raodio stoped working how can i see if my service has ran out

You can call toll free 1-800-XM Radio (1-800-967-2346) and ask them the status of your current membership. You will have to tell them the "model number" of your XM Radio, plus the "Radio ID Number" which should be stamped on the bottom of your radio, or can be found on radio channel 0 (Zero). If your membership is expired or cancelled, then it is up to you to re-subscribe.

If you are a valid subscriber, then tune the radio to Channel One, and see if you can get talking and/or music on that channel. If you do NOT receive Channel One, then you have an internal problem with your radio, not your subscribership.

Turn the radio off, wait 5 seconds, then turn on the radio. Watch the screen carefully... It should say, XM Satellite Radio, then the Channel Number, then "Loading", and then you should get sound or music. If you get "NO SIGNAL", then you have an Antenna or internal circuitry problem. Find someone who also has an XM Radio, test your radio by plugging in your Radio into their Antenna, and see if it makes a difference. If still "NO SIGNAL", then you are screwed.

Decide if you want to replace the radio with a new one, or go without.

Good Luck...

Aug 09, 2010 | Delphi Roady XT XM Radio Receiver

1 Answer

TP329 instruction manual

The manufacturer has apparently pulled it off their site, but you can download/print your manual here:


Jan 25, 2010 | Oregon Scientific TP329 Two Way Radio

1 Answer

Oregon Scientific RRM326P Snooze button won't work with radio

this is internal speaker control volume defect, please send to repair shop for repair.

Nov 29, 2009 | Audio Players & Recorders

1 Answer

Oregon Scientific Radio controlled Thermo Clock RMR382A -

Check the channel mode that you are in. I play with the channel /memory buttons on mine and I finally get it to work. Sometimes it worksfor weeks sometimes just a day. Just glad I can get it to work - thought it was the remote unit but I was wrong.

Sep 03, 2017 | Oregon Scientific RMR-182A Clock Radio

Not finding what you are looking for?
Oregon Scientific TP329  Two Way Radio Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Radio Communications Experts


Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

16147 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you an Oregon Scientific Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides